Article

Bavithra, K (2023) Optimizing Supply Chain Efficiency: Integrating Deep Learning and Blockchain Technologies. 2023 International Conference on Intelligent Technologies for Sustainable Electric and Communications Systems (iTech SECOM). pp. 113-118.

Chandramohan, G (2018) Case Study on Effective Use of Mind Map in Engineering Education. 2018 IEEE Tenth International Conference on Technology for Education (T4E). pp. 205-207.

Chandramohan, G (2020) Investigations of the effect of the tool rotational speed on friction stir welded joint on aluminium metal matrix hybrid composite. IOP Conference Series: Materials Science and Engineering, 988 (1). 012045. ISSN 1757-8981

Chinnaraj, P (2023) Optimization of Metal-Matrix Composites by W-EDM with CNT. 2023 Intelligent Computing and Control for Engineering and Business Systems (ICCEBS). pp. 1-7.

Elango, N (2023) Modeling of Rotary Tool Adapted Electrochemical Machining of AISI 202. 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE). pp. 1-7.

Manimegalai, R and Yashik, S and Renuka, S and Gomathi, B (2024) Automation manufacturing using MES. 020005.

Nagarjun, J and Rajeshkumar, G and Anto Dilip, A (2023) Enhanced mechanical characteristics of polylactic acid/tamarind kernel filler green composite filament for 3D printing. Polymer Composites, 44 (11). pp. 7925-7940. ISSN 0272-8397

Nanthakumar, S (2023) Optimization and experimental investigation on AA6082/WC metal matrix composites by abrasive flow machining process. Materials Today: Proceedings. ISSN 22147853

Nanthakumar, S (2024) Toolpath and Tool Design Innovations in Deformation Machining for Superior AA-7075 T6 Fins. Journal of Physics: Conference Series, 2837 (1): 012060. ISSN 1742-6588

Natarajan, Elango (2024) Depriving friction stir weld defects in dissimilar aluminum lap joints. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Rajeshkumar, G (2023) Effect of post-processing treatment on 3D-printed polylactic acid parts: layer interfaces and mechanical properties. International Journal of Materials Research, 114 (10-11). pp. 999-1005. ISSN 1862-5282

Rajeshkumar, G (2024) Impact of Manufacturing Methods on the Mechanical Characteristics of Polymer Matrix Composites with Glass and Epoxy Fiber Reinforcement. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Rajeshkumar, G (2021) Influence of Sodium Hydroxide (NaOH) Treatment on Mechanical Properties and Morphological Behaviour of Phoenix sp. Fiber/Epoxy Composites. Journal of Polymers and the Environment, 29 (3). pp. 765-774. ISSN 1566-2543

Rajeshkumar, G (2022) Review of advanced techniques for manufacturing biocomposites: non-destructive evaluation and artificial intelligence-assisted modeling. Journal of Materials Science, 57 (34). pp. 16091-16146. ISSN 0022-2461

Rajeshkumar, G and Harikrishna, A M and Ajithkumar, S (2020) A Comprehensive Review on Manufacturing Methods and Characterization of Al6061 Composites. Materials Today: Proceedings, 22. pp. 2597-2605. ISSN 22147853

Rajkumar, V and Ajay Vasanth, X (2024) Some studies on optimization of process parameters for wire ARC additive manufacturing of Hastelloy C276 using GRA-GWO hybrid techniques. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Ramesh, R (2019) Multi-response Optimization of End Milling Parameters for Al-Zn-Mg/SiC Co-continuous Composite Using Response Surface Methodology. Materials Science, 25 (4). pp. 471-477. ISSN 1392-1320

Saravanakumar, N (2019) Multi-objective optimization of micro deep drawing process using taguchi-based grey relational analysis. Journal of the Balkan Tribological Association, 25 (1). pp. 50-66. ISSN 13104772

Senthilkumar, K (2024) Analysis of the thermal properties in short sansevieria cylindrica fibre/PLA composites processed by twin screw extruder followed by hot press molding technique. Materials Research Express, 11 (3). 035506. ISSN 2053-1591

Senthilkumar, K (2023) Flexural, impact, and dynamic mechanical analysis of glass fiber/ABS and glass fiber/carbon fiber/ABS composites. Journal of Applied Polymer Science, 140 (27). ISSN 0021-8995

Senthilkumar, K (2023) Study on the Inter-Laminar Shear Strength and Contact Angle of Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid Composites. Applied Science and Engineering Progress, 16 (3). ISSN 26729156

Senthilkumar, K and Anto Dilip, A (2023) Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid. Lubricants, 11 (3). p. 131. ISSN 2075-4442

Sivananda Devi, K (2021) Interpretive framework by analysing the enablers for implementation of Industry 4.0: an ISM approach. Total Quality Management & Business Excellence, 32 (13-14). pp. 1494-1514. ISSN 1478-3363

Subash Kumar, C S (2022) An Energy Efficient Architecture for Furnace Monitor and Control in Foundry Based on Industry 4.0 Using IoT. Scientific Programming, 2022: 1128717. pp. 1-8. ISSN 1058-9244

Thirumalai Kumaran, S (2023) Investigation of machining quality indicators and effect of tool geometry parameters during the machining of difficult-to-machine metal. Results in Materials, 20. p. 100487. ISSN 2590048X

Thirumalai Kumaran, S (2023) Numerical Modeling of Kerf Generation in Abrasive Waterjet Machining of Military Grade Armor Steel. Human Factors and Mechanical Engineering for Defense and Safety, 7 (1). ISSN 2509-8004

Book Section

UNSPECIFIED (2024) Front Matter. In: Thirumalai Kumaran, S (ed.) Sustainable Machining and Green Manufacturing. Wiley. ISBN 9781394197866

Elangovan, D (2021) Hardfacing of Ni-Based Alloys on Medium Carbon Steel to Improve Turbine Blade Properties. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 515-523. ISBN 9789811598098

Elangovan, D and Vishnupriyan, R (2021) Development of Supply Chain Risk Management Strategies for Mitigating Loss Prevention in Manufacturing Organizations. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 525-538. ISBN 9789811598098

Jagadeesh, B (2024) Roadmap to Achieve Sustainable and Eco-Friendly Metal Additive Manufacturing Processes:. In: Futuristic Technology for Sustainable Manufacturing. IGI Global, pp. 185-215. ISBN 9798369318621

Rajeshkumar, G (2021) Fault Diagnosis of Unbalanced Multirotor System. In: Recent Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 387-396. ISBN 9789811575570

Rajeshkumar, G (2021) Preface. In: UNSPECIFIED Springer, Singapore.

Rajeshkumar, G and Naveen Kumar, K and Aravind, M and Santhosh, S and Gowtham Keerthi, T K and Arvindh Seshadri, S (2021) A Comprehensive Review on Mechanical Properties of Natural Cellulosic Fiber Reinforced PLA Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 227-237. ISBN 9789811598098

Rajkumar, V (2021) Experimental Investigation on Tool Wear Using Sub-zero Treated Insert in Turning of EN 24 Steel. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 903-912. ISBN 9789811598098

Rajkumar, V (2023) Preface, Materials, Design and Manufacturing for Sustainable Environment. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 9789811930522

Ramesh, R (2023) Preface, Lecture Notes in Mechanical Engineering. In: Advances in Modern Machining Processes. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 9789811971495

Shievedha, S and Dharshini, V P and Ajay Vasanth, X (2024) Optimization and Prediction of Tool Wear Using Hybrid Grey Relation Analysis and Regression for Milling Operation. In: Recent Advances in Industrial and Systems Engineering. RAISE 2023. Lecture Notes on Multidisciplinary Industrial Engineering . Springer, Singapore, pp. 271-280.

Book

Thirumalai Kumaran, S (ed.). (2024) Sustainable Machining and Green Manufacturing. Wiley. ISBN 9781394197866

Ramesh, R (2023) Advances in Modern Machining Processes. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 9789811971495

Patent

PSG Institute of Technology and Applied Research (2023) STRETCHER CONVERTIBLE WHEELCHAIR. 448440.

PSG Institute of Technology and Applied Research (2024) PNEUMATIC SYSTEM FOR CRUSHING ONE OR MORE CANS AUTOMATICALLY. 528167.