B

Bavithra, K (2023) Optimizing Supply Chain Efficiency: Integrating Deep Learning and Blockchain Technologies. In: 2023 International Conference on Intelligent Technologies for Sustainable Electric and Communications Systems (iTech SECOM), Coimbatore, India.

C

Chandramohan, G (2018) Case Study on Effective Use of Mind Map in Engineering Education. In: 2018 IEEE Ninth International Conference on Technology for Education (T4E), Chennai.

Chandramohan, G (2020) Investigations of the effect of the tool rotational speed on friction stir welded joint on aluminium metal matrix hybrid composite. In: IOP Conference Series: Materials Science and Engineering.

Chinnaraj, P (2023) Optimization of Metal-Matrix Composites by W-EDM with CNT. In: 2023 Intelligent Computing and Control for Engineering and Business Systems (ICCEBS), Chennai, India.

E

Elango, N (2023) Modeling of Rotary Tool Adapted Electrochemical Machining of AISI 202. In: 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), Auckland, New Zealand.

Elangovan, D (2021) Hardfacing of Ni-Based Alloys on Medium Carbon Steel to Improve Turbine Blade Properties. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 515-523. ISBN 9789811598098

Elangovan, D and Vishnupriyan, R (2021) Development of Supply Chain Risk Management Strategies for Mitigating Loss Prevention in Manufacturing Organizations. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 525-538. ISBN 9789811598098

J

Jagadeesh, B (2024) Roadmap to Achieve Sustainable and Eco-Friendly Metal Additive Manufacturing Processes:. In: Futuristic Technology for Sustainable Manufacturing. IGI Global, pp. 185-215. ISBN 9798369318621

M

Manimegalai, R and Yashik, S and Renuka, S and Gomathi, B (2024) Automation manufacturing using MES. In: 2ND INTERNATIONAL CONFERENCE ON APPLIED MATHEMATICS AND COMPUTATIONAL SCIENCES 2022 (ICAMCS-2022), 12–14 October 2022, Dehradun, India.

N

Nagarjun, J and Rajeshkumar, G and Anto Dilip, A (2023) Enhanced mechanical characteristics of polylactic acid/tamarind kernel filler green composite filament for 3D printing. Polymer Composites, 44 (11). pp. 7925-7940. ISSN 0272-8397

Nanthakumar, S (2023) Optimization and experimental investigation on AA6082/WC metal matrix composites by abrasive flow machining process. Materials Today: Proceedings. ISSN 22147853

Natarajan, Elango (2024) Depriving friction stir weld defects in dissimilar aluminum lap joints. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

R

Rajeshkumar, G (2023) Effect of post-processing treatment on 3D-printed polylactic acid parts: layer interfaces and mechanical properties. International Journal of Materials Research, 114 (10-11). pp. 999-1005. ISSN 1862-5282

Rajeshkumar, G (2021) Fault Diagnosis of Unbalanced Multirotor System. In: Recent Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 387-396. ISBN 9789811575570

Rajeshkumar, G (2021) Influence of Sodium Hydroxide (NaOH) Treatment on Mechanical Properties and Morphological Behaviour of Phoenix sp. Fiber/Epoxy Composites. Journal of Polymers and the Environment, 29 (3). pp. 765-774. ISSN 1566-2543

Rajeshkumar, G (2021) Preface. Springer, Singapore.

Rajeshkumar, G (2022) Review of advanced techniques for manufacturing biocomposites: non-destructive evaluation and artificial intelligence-assisted modeling. Journal of Materials Science, 57 (34). pp. 16091-16146. ISSN 0022-2461

Rajeshkumar, G and Harikrishna, A M and Ajithkumar, S (2020) A Comprehensive Review on Manufacturing Methods and Characterization of Al6061 Composites. Materials Today: Proceedings, 22. pp. 2597-2605. ISSN 22147853

Rajeshkumar, G and Naveen Kumar, K and Aravind, M and Santhosh, S and Gowtham Keerthi, T K and Arvindh Seshadri, S (2021) A Comprehensive Review on Mechanical Properties of Natural Cellulosic Fiber Reinforced PLA Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 227-237. ISBN 9789811598098

Rajkumar, V (2021) Experimental Investigation on Tool Wear Using Sub-zero Treated Insert in Turning of EN 24 Steel. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 903-912. ISBN 9789811598098

Rajkumar, V (2023) Preface, Materials, Design and Manufacturing for Sustainable Environment. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 9789811930522

Rajkumar, V and Ajay Vasanth, X (2024) Some studies on optimization of process parameters for wire ARC additive manufacturing of Hastelloy C276 using GRA-GWO hybrid techniques. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Ramesh, R (2023) Advances in Modern Machining Processes. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 9789811971495

Ramesh, R (2019) Multi-response Optimization of End Milling Parameters for Al-Zn-Mg/SiC Co-continuous Composite Using Response Surface Methodology. Materials Science, 25 (4). pp. 471-477. ISSN 1392-1320

Ramesh, R (2023) Preface, Lecture Notes in Mechanical Engineering. In: Advances in Modern Machining Processes. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 9789811971495

S

Saravanakumar, N (2019) Multi-objective optimization of micro deep drawing process using taguchi-based grey relational analysis. Journal of the Balkan Tribological Association, 25 (1). pp. 50-66. ISSN 13104772

Senthilkumar, K (2024) Analysis of the thermal properties in short sansevieria cylindrica fibre/PLA composites processed by twin screw extruder followed by hot press molding technique. Materials Research Express, 11 (3). 035506. ISSN 2053-1591

Senthilkumar, K (2023) Flexural, impact, and dynamic mechanical analysis of glass fiber/ABS and glass fiber/carbon fiber/ABS composites. Journal of Applied Polymer Science, 140 (27). ISSN 0021-8995

Senthilkumar, K (2023) Study on the Inter-Laminar Shear Strength and Contact Angle of Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid Composites. Applied Science and Engineering Progress, 16 (3). ISSN 26729156

Senthilkumar, K and Anto Dilip, A (2023) Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid. Lubricants, 11 (3). p. 131. ISSN 2075-4442

Shievedha, S and Dharshini, V P and Ajay Vasanth, X (2024) Optimization and Prediction of Tool Wear Using Hybrid Grey Relation Analysis and Regression for Milling Operation. In: Recent Advances in Industrial and Systems Engineering. RAISE 2023. Lecture Notes on Multidisciplinary Industrial Engineering . Springer, Singapore, pp. 271-280.

Sivananda Devi, K (2021) Interpretive framework by analysing the enablers for implementation of Industry 4.0: an ISM approach. Total Quality Management & Business Excellence, 32 (13-14). pp. 1494-1514. ISSN 1478-3363

Subash Kumar, C S (2022) An Energy Efficient Architecture for Furnace Monitor and Control in Foundry Based on Industry 4.0 Using IoT. Scientific Programming, 2022: 1128717. pp. 1-8. ISSN 1058-9244

T

Thirumalai Kumaran, S (2023) Investigation of machining quality indicators and effect of tool geometry parameters during the machining of difficult-to-machine metal. Results in Materials, 20. p. 100487. ISSN 2590048X

Thirumalai Kumaran, S (2023) Numerical Modeling of Kerf Generation in Abrasive Waterjet Machining of Military Grade Armor Steel. Human Factors and Mechanical Engineering for Defense and Safety, 7 (1). ISSN 2509-8004