Article

Arun, M and Abdul Aleem Mohamed, I and Deepasree, S (2023) Studies on nano-hybrid biopolymer composite coating on corroded steel to improve the corrosion resistance and hydrophobicity of the surface. Innovative Infrastructure Solutions, 8 (5): 155. ISSN 2364-4176

Elango, N and Saravanakumar, N and Anto Dilip, A (2023) Enhanced mechanical, tribological, and acoustical behavior of polyphenylene sulfide composites reinforced with zero‐dimensional alumina. Journal of Applied Polymer Science, 140 (16): e53748. ISSN 0021-8995

Jayakumar, S (2016) A comparative study on CdS: PEO and CdS: PMMA nanocomposite solid films. Materials Research Bulletin, 80. pp. 36-43. ISSN 00255408

Prabunathan, P and Hariharan, A and BalajI, K and Alagar, M (2020) Partially Exfoliated α-ZrP Reinforced Unsaturated Polyester Nanocomposites by Simultaneous Co-polymerization and Brønsted Acid–Base Strategy. Journal of Inorganic and Organometallic Polymers and Materials, 30 (10). pp. 4095-4105. ISSN 1574-1443

Rajeshkumar, G (2024) Effect of halloysite addition on the dynamic mechanical and tribological properties of carbon and glass fiber reinforced hybrid composites. Heliyon, 10 (15): e35554. ISSN 24058440

Rajeshkumar, G (2022) An Investigation into the Tribological Properties of Bidirectional Jute/Carbon Fiber Reinforced Polyester Hybrid Composites. Journal of Natural Fibers, 19 (3). pp. 943-953. ISSN 1544-0478

Rajeshkumar, G (2022) Tribological and Thermo-Mechanical Performance of Chemically Modified Musa Acuminata / Corchorus Capsularis Reinforced Hybrid Composites. Journal of Natural Fibers, 19 (12). pp. 4640-4653. ISSN 1544-0478

Santhana, V and Thangaraju, D and Jayakumar, S (2020) Development of Hybrid TiO2/Paint Sludge Extracted Microbe Composite for Enhanced Photocatalytic Dye Degradation. Journal of Inorganic and Organometallic Polymers and Materials, 30 (7). pp. 2805-2813. ISSN 1574-1443

Senthilkumar, K (2024) Experimental investigation on the thermal characteristics of Kevlar/hemp intraply hybrid composites: Influence of various weaving designs. Industrial Crops and Products, 221. p. 119280. ISSN 09266690

Senthilkumar, K (2023) Quasi-static Indentation Behavior of Kevlar-Hemp and Kevlar-PALF Composites: Influence of Weaving Architecture and Intra-ply Hybridization. Applied Composite Materials, 30 (3). pp. 937-953. ISSN 0929-189X

Book Section

Mohanram, P V (2020) Enhancement of Static and Dynamic Characteristics on Micro-lathe Bed by the Use of Alternate Form Design and Composite Materials. In: Lecture Notes on Multidisciplinary Industrial Engineering. Springer, pp. 611-621.

Nidhya, R and Abdul Aleem Mohamed, I and Arun, M (2024) Unveiling the Promise of Phase Change Materials in Geopolymer Composites: A Comprehensive Review. In: Next Generation Materials for Sustainable Engineering. IGI Global, pp. 11-39. ISBN 9798369313077

Conference or Workshop Item

Archana, D (2024) Boundary Confusion Alleviation and Multiscale-temporal Feature Extraction for VAG-based Fine-grained Multi-grade Osteoarthritis Deterioration Monitoring. In: 2024 International Conference on Communication, Computing and Internet of Things (IC3IoT), Chennai, India.