E

Elango, N and Saravanakumar, N and Anto Dilip, A (2023) Enhanced mechanical, tribological, and acoustical behavior of polyphenylene sulfide composites reinforced with zero‐dimensional alumina. Journal of Applied Polymer Science, 140 (16): e53748. ISSN 0021-8995

N

Nagarjun, J (2023) Revalorisation of tamarind seed waste for improved PLA wear and hydrophilic behaviour in 3D printing applications. Biomass Conversion and Biorefinery. ISSN 2190-6815

Nanthakumar, S (2023) Investigation on the characterization of hot extruded AA7075 based metal matrix composites developed by powder metallurgy. Journal of Physics: Conference Series, 2603 (1): 012041. ISSN 1742-6588

Nanthakumar, S and Thangaraju, D (2023) Influence of single phase NiS nanoparticles as lubricant additive in microscale deformation of copper gear. Australian Journal of Mechanical Engineering. pp. 1-12. ISSN 1448-4846

R

Rajeshkumar, G (2024) Effect of halloysite addition on the dynamic mechanical and tribological properties of carbon and glass fiber reinforced hybrid composites. Heliyon, 10 (15): e35554. ISSN 24058440

Rajeshkumar, G (2022) An Investigation into the Tribological Properties of Bidirectional Jute/Carbon Fiber Reinforced Polyester Hybrid Composites. Journal of Natural Fibers, 19 (3). pp. 943-953. ISSN 1544-0478

Rajeshkumar, G (2023) Investigation of mechanical and wear properties of Al6061/Si 3 N 4 /MgO hybrid composite fabricated by stir casting method. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237 (3). pp. 702-709. ISSN 0954-4089

Rajeshkumar, G (2022) Tribological and Thermo-Mechanical Performance of Chemically Modified Musa Acuminata / Corchorus Capsularis Reinforced Hybrid Composites. Journal of Natural Fibers, 19 (12). pp. 4640-4653. ISSN 1544-0478

Ramesh, R (2018) Taguchi Grey Relational Analysis for Multi-Response Optimization of Wear in Co-Continuous Composite. Materials, 11 (9). p. 1743. ISSN 1996-1944

S

Saravanakumar, N (2019) Experimental study on the anti-wear and anti-corrosive properties of the water-soluble metalworking fluid dispersed with copper and aluminium oxide nanoparticles. Materials Research Express, 6 (12). p. 125022. ISSN 2053-1591

Saravanakumar, N (2018) Influence of Ag Nanoparticles for the Anti-wear and Extreme Pressure Properties of the Mineral Oil Based Nano-cutting Fluid. Tribology in Industry, 40 (3). pp. 440-447. ISSN 03548996

Saravanakumar, N and Anto Dilip, A (2022) Mechanical and wear behaviour of PEEK, PTFE and PU: review and experimental study. Journal of Polymer Engineering, 42 (5). pp. 407-417. ISSN 0334-6447

Saravanakumar, N and Jothi Saravanan, M L and Barathkumar, K E and Gokula Kannan, K and Karthikeyan, R (2019) Development and testing of nano particulate lubricant for worm gear application. Journal of Mechanical Science and Technology, 33 (4). pp. 1785-1791. ISSN 1738-494X

Senthilkumar, K (2024) Tribological Properties of the Natural Fiber‐Reinforced Vinyl Ester Composites. In: Tribological Properties, Performance and Applications of Biocomposites. Wiley, pp. 65-73. ISBN 9783527838080

Senthilkumar, K (2024) Tribological Properties, Performance and Applications of Biocomposites. Wiley. ISBN 9783527838080

Senthilkumar, K and Anto Dilip, A (2023) Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid. Lubricants, 11 (3). p. 131. ISSN 2075-4442

Senthilvel, M and Saravanakumar, N and Hareni, M (2023) Synthesis of chemically exfoliated reduced graphene oxide from as-grated graphite rods recovered from used household batteries for utilization in tribological applications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 237 (9). pp. 2068-2082. ISSN 1464-4207