Article

Alagar, M (2020) Evaluation of thermo-mechanical, dielectric and corrosion resistant properties of cardanol benzoxazine-epoxy based hybrid composites: A very low temperature curing pre-polymer for high performance paint related applications. High Performance Polymers, 32 (5). pp. 524-539. ISSN 0954-0083

Arun, M (2023) A state-of-art review on the mechanical performance of basalt textile reinforced concrete (BTRC). Journal of Mechanics of Materials and Structures, 18 (4). pp. 593-618. ISSN 1559-3959

Arunkumar, K and Sasikumar, R and Latha, G and Alagar, M (2024) Card-bisphenol based bio-silica reinforced poly(urethane-co-benzoxazine) foam for an electrical insulation. Journal of Environmental Chemical Engineering, 12 (3). p. 112556. ISSN 22133437

Chandramohan, G (2018) Production and characterization of mechanical and microstructural behaviour of friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles. Journal of Ceramic Processing Research, 19 (1). pp. 69-74. ISSN 1229-9162

Elango, N (2023) Targeted Pre-Treatment of Hemp Fibers and the Effect on Mechanical Properties of Polymer Composites. Fibers, 11 (5): 43. ISSN 2079-6439

Elango, N and Saravanakumar, N and Anto Dilip, A (2022) Drilling-Induced Damages in Hybrid Carbon and Glass Fiber-Reinforced Composite Laminate and Optimized Drilling Parameters. Journal of Composites Science, 6 (10): 310. ISSN 2504-477X

Hariharan, A (2024) Bio-based treatment of hemp fiber for use as reinforcement of a composite: An effort towards development of green and sustainable polybenzoxazine brake pad. Tribology International, 193. p. 109394. ISSN 0301679X

Harinei, S and Hariharan, A and Anto Dilip, A and BalajI, K and Abdul Aleem Mohamed, I and Arun, M and Alagar, M (2023) Desert cotton and areca nut husk fibre reinforced hybridized bio-benzoxazine/epoxy bio-composites: Thermal, electrical and acoustic insulation applications. Construction and Building Materials, 363. p. 129870. ISSN 09500618

Harinei, S and Hariharan, A and BalajI, K and Alagar, M (2024) High‐potent trifunctional polybenzoxazines coatings for superhydrophobic cotton fabrics and mild steel corrosion protection applications. Journal of Applied Polymer Science. ISSN 0021-8995

Jayakumar, S (2019) Tunable luminescence and transmittance nature of CdS:PMMA nanocomposites for optoelectronic applications. Optics & Laser Technology, 112. pp. 409-412. ISSN 00303992

Maruthamuthu, S (2021) Design of zinc vanadate (Zn3V2O8)/nitrogen doped multiwall carbon nanotubes (N-MWCNT) towards supercapacitor electrode applications. Journal of Electroanalytical Chemistry, 881 (114936). ISSN 15726657

Mohanram, P V (2015) Mechanical and dynamic properties of nettle-polyester composite. Materials Express, 5 (6). pp. 505-517. ISSN 21585849

Nagarjun, J (2023) Revalorisation of tamarind seed waste for improved PLA wear and hydrophilic behaviour in 3D printing applications. Biomass Conversion and Biorefinery. ISSN 2190-6815

Nanthakumar, S (2023) Enhancement of natural fiber-reinforced plastics by polyester and seaweed waste fibers. Materials Today: Proceedings. ISSN 22147853

Nanthakumar, S (2022) Experimental study of mechanical properties of Sisal/banana fiber hybrid sandwich composite. Materials Today: Proceedings, 68 (5). pp. 1793-1799. ISSN 22147853

Nanthakumar, S (2023) Influence of powdered chick eggshell (PECS) on mechanical and wear properties of kenaf fiber (KF) reinforced composites. Materials Today: Proceedings. ISSN 22147853

Nanthakumar, S (2023) Investigation on silane modification and interfacial UV aging of flax fibre reinforced with polystyrene composite. Materials Today: Proceedings. ISSN 22147853

Nanthakumar, S (2023) Optimization and experimental investigation on AA6082/WC metal matrix composites by abrasive flow machining process. Materials Today: Proceedings. ISSN 22147853

Nanthakumar, S (2023) Study on Mechanical Properties of Polylactic Acid Matrix Added with Fly Ash and Tamarind Kernel Powder Micro Fillers. NanoWorld Journal, 9 (S1). S626-S630. ISSN 23791101

Natarajan, Elango (2024) Depriving friction stir weld defects in dissimilar aluminum lap joints. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Rajeshkumar, G (2021) Characterization of novel natural cellulosic fibers from purple bauhinia for potential reinforcement in polymer composites. Cellulose, 28 (9). pp. 5373-5385. ISSN 0969-0239

Rajeshkumar, G (2022) Delamination and surface roughness analysis of jute/polyester composites using response surface methodology: Consequence of sodium bicarbonate treatment. Journal of Industrial Textiles, 51 (1_supp). 360S-377S. ISSN 1528-0837

Rajeshkumar, G (2019) Dynamic Characteristics of Twisted Composite Panels. International Journal of Recent Technology and Engineering (IJRTE), 8 (3). pp. 6488-6499. ISSN 22773878

Rajeshkumar, G (2023) Effect of hybridization on mechanical and water absorption properties of short palmyra palm leaf stalk/carbon fibers reinforced polyester composites. Polymer Composites, 44 (12). pp. 8693-8702. ISSN 0272-8397

Rajeshkumar, G (2022) Improvement of mechanical and thermal properties of hybrid composites through addition of halloysite nanoclay for light weight structural applications. Journal of Industrial Textiles, 51 (3_supp). 4880S-4898S. ISSN 1528-0837

Rajeshkumar, G (2022) Improving the mechanical properties of jute fiber woven mat reinforced epoxy composites with addition of zinc oxide filler. E3S Web of Conferences, 355. 02006. ISSN 2267-1242

Rajeshkumar, G (2022) Influence of Processing Variables on Tensile Strength and Water Absorption of Natural Fibers Hybrid Composites. Journal of Natural Fibers, 19 (15). pp. 10846-10857. ISSN 1544-0478

Rajeshkumar, G (2021) Influence of Sodium Hydroxide (NaOH) Treatment on Mechanical Properties and Morphological Behaviour of Phoenix sp. Fiber/Epoxy Composites. Journal of Polymers and the Environment, 29 (3). pp. 765-774. ISSN 1566-2543

Rajeshkumar, G (2021) Influence of sodium bicarbonate treatment on the free vibration characteristics of Phoenix sp. fiber loaded polyester composites. Materials Today: Proceedings, 52. pp. 2400-2403. ISSN 22147853

Rajeshkumar, G (2024) Influence of stacking sequence and halloysite addition on the fracture toughness and low‐velocity impact strength of carbon/glass fiber reinforced hybrid composites. Polymer Composites, 45 (1). pp. 328-337. ISSN 0272-8397

Rajeshkumar, G (2021) Mechanical and free vibration properties of Phoenix sp . fiber reinforced epoxy composites: Influence of sodium bicarbonate treatment. Polymer Composites, 42 (12). pp. 6362-6369. ISSN 0272-8397

Rajeshkumar, G (2021) Mechanical properties of polymer matrix composites: Effect of hybridization. Materials Today: Proceedings, 34 (2). pp. 536-538. ISSN 22147853

Rajeshkumar, G (2020) The Role of Stacking Order on Mechanical Properties of Glass/Carbon Reinforced Epoxy Hybrid Composites Prepared by Resin Infusion Technique. Materials Today: Proceedings, 22. pp. 2446-2451. ISSN 22147853

Rajeshkumar, G (2022) Sustainable Development of Cissus Quadrangularis Stem Fiber/epoxy Composite on Abrasive Wear Rate. Journal of Natural Fibers, 19 (14). pp. 9283-9295. ISSN 1544-0478

Rajeshkumar, G (2019) An experimental study on the effect of nano-clay addition on mechanical and water absorption behaviour of jute fibre reinforced epoxy composites. Journal of Industrial Textiles, 49 (5). pp. 597-620. ISSN 1528-0837

Rajeshkumar, G (2020) An experimental study on the interdependence of mercerization, moisture absorption and mechanical properties of sustainable Phoenix sp. fibre-reinforced epoxy composites. Journal of Industrial Textiles, 49 (9). pp. 1233-1251. ISSN 1528-0837

Rajeshkumar, G (2019) The influence of fiber content and length on mechanical and water absorption properties of Calotropis Gigantea fiber reinforced epoxy composites. Journal of Industrial Textiles, 48 (8). pp. 1274-1290. ISSN 1528-0837

Rajeshkumar, G and Arvindh Seshadri, S (2021) Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites – A comprehensive review. Journal of Cleaner Production, 310. p. 127483. ISSN 09596526

Rajeshkumar, G and Arvindh Seshadri, S (2021) A comprehensive review on natural fiber/ nano‐clay reinforced hybrid polymeric composites: Materials and technologies. Polymer Composites, 42 (8). pp. 3687-3701. ISSN 0272-8397

Rajeshkumar, G and Harikrishna, A M and Ajithkumar, S (2020) A Comprehensive Review on Manufacturing Methods and Characterization of Al6061 Composites. Materials Today: Proceedings, 22. pp. 2597-2605. ISSN 22147853

Rajeshkumar, G and Janarthanan, P (2024) Effect of fish scale powder addition on the mechanical and free vibration properties of jute/carbon fibers reinforced hybrid polyester composites. Polymer Composites. ISSN 0272-8397

Rajkumar, R and Navin Ganesh, V (2021) An experimental performance evaluation of Flex Banner and polypropylene fibre reinforced bituminous mixes. Materials Today: Proceedings, 45 (7). pp. 6224-6228. ISSN 22147853

Rajkumar, V (2020) A systematic review of effect of different welding process on mechanical properties of grade 5 titanium alloy. Materials Today: Proceedings, 21. pp. 948-953. ISSN 22147853

Ramesh, R (2020) Ballistic Testing and Simulation of Co-continuous Ceramic Composite for Body Armour. International Journal of Engineering, 33 (9). pp. 1792-1796. ISSN 24237167

Ramesh, R (2018) Taguchi Grey Relational Analysis for Multi-Response Optimization of Wear in Co-Continuous Composite. Materials, 11 (9). p. 1743. ISSN 1996-1944

Sakthivel, T (2024) Pleurotus ostreatus mycelium biofilters: a sustainable approach for thermal insulation in buildings. Matéria (Rio de Janeiro), 29 (3). ISSN 1517-7076

Saravanakumar, N (2018) CORROSION BEHAVIOR OF A Ni–TiO2 NANOCOMPOSITE COATED BY PULSE ELECTRODEPOSITION. High Temperature Material Processes An International Quarterly of High-Technology Plasma Processes, 22 (4). pp. 219-229. ISSN 1093-3611

Saravanakumar, N and Anto Dilip, A (2024) Structural integrity and mechanical behaviour of magnesium oxide (MgO) as reinforcement in PLA-HDPE composite. Emergent Materials. ISSN 2522-5731

Senthilkumar, K (2024) Experimental investigation on the mechanical and acoustic performance of hemp/kenaf hybrid composites: Influence of different stacking sequences. Polymer Composites. ISSN 0272-8397

Senthilkumar, K (2023) Exploring the recycling potential of HDPE films reinforced with flax fiber for making sustainable decorative tiles. Journal of Materials Research and Technology, 25. pp. 2049-2060. ISSN 22387854

Senthilkumar, K (2022) Flexural, impact and dynamic mechanical analysis of hybrid composites: Olive tree leaves powder/ pineapple leaf fibre/epoxy matrix. Journal of Materials Research and Technology, 21. pp. 4241-4252. ISSN 22387854

Senthilkumar, K (2023) Investigating the Effect of Varied Short Bamboo Fiber Content on the Thermal, Impact, and Flexural Properties of Green Epoxy Composites. Journal of Natural Fibers, 21 (1). ISSN 1544-0478

Senthilkumar, K (2023) Investigating the synergistic effect of olive trunk leaves powder and pineapple leaf fibers on the physical, tensile, and thermal properties of epoxy‐based composites. Polymer Composites, 44 (6). pp. 3416-3424. ISSN 0272-8397

Senthilkumar, K (2022) Lignocellulosic microfibrils from Phaseolus lunatus and Vigna radiata biomass: characterization and properties. Biomass Conversion and Biorefinery. ISSN 2190-6815

Senthilkumar, K (2022) Mechanical, absorption, and swelling properties of jute/kenaf/banana reinforced epoxy hybrid composites: Influence of various stacking sequences. Polymer Composites, 43 (11). pp. 8297-8307. ISSN 0272-8397

Senthilkumar, K (2022) Nanocellulose: A Fundamental Material for Science and Technology Applications. Molecules, 27 (22). p. 8032. ISSN 1420-3049

Senthilkumar, K (2022) Ply-stacking effects on mechanical properties of Kevlar-29/banana woven mats reinforced epoxy hybrid composites. Journal of Industrial Textiles, 52. ISSN 1528-0837

Senthilkumar, K (2024) Progress in food packaging applications of biopolymer-nanometal composites — A comprehensive review. Biomaterials Advances, 162: 213921. ISSN 27729508

Senthilkumar, K (2024) Thermal and tensile properties of 3D printed ABS-glass fibre, ABS-glass fibre-carbon fibre hybrid composites made by novel hybrid manufacturing technique. Journal of Thermoplastic Composite Materials, 37 (1). pp. 206-225. ISSN 0892-7057

Senthilkumar, K (2023) Turning waste plant fibers into advanced plant fiber reinforced polymer composites: A comprehensive review. Composites Part C: Open Access, 10. p. 100333. ISSN 26666820

Senthilkumar, K (2024) A correlation study on piezo-embedded carbon fibre reinforced polylactic acid composite: Experimental and numerical modelling. Journal of Thermoplastic Composite Materials. ISSN 0892-7057

Senthilkumar, K (2023) The effect of nanoclay on the performance of basalt-epoxy facesheet and foam core sandwich panels. Journal of Sandwich Structures & Materials, 25 (7). pp. 730-746. ISSN 1099-6362

Senthilkumar, K and Anto Dilip, A (2023) Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid. Lubricants, 11 (3). p. 131. ISSN 2075-4442

Thirumalai Kumaran, S (2023) EBSD analysis of spark plasma sintered SS316-B4C composite. Micron, 166: 103401. ISSN 09684328

Thirumalai Kumaran, S (2024) Optimization modelling of spark plasma sintering parameters of SS316-B4C composite. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (4). pp. 2415-2427. ISSN 1955-2513

Thirumalai Kumaran, S (2024) Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique. Mechanics of Advanced Composite Structures, 11 (2). pp. 385-400. ISSN 24234826

Thirumalai Kumaran, S (2023) Physio-mechanical Characterization and Thermal Property Evaluation of Polylactic Acid/Waste Hazelnut Shell Flour Composite with Inorganic Additives. Journal of Testing and Evaluation, 51 (5). pp. 3390-3401. ISSN 0090-3973

Thirumalai Kumaran, S (2023) Vibration Studies on Fiber Reinforced Composites – a Review. Journal of Natural Fibers, 20 (1). ISSN 1544-0478

Book Section

Elangovan, D (2023) Experimental Investigations of Composite Material Using Bamboo Fiber Reinforced with Polypropylene Plastic Additives. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 351-362. ISBN 9789811930522

Hariharan, A and BalajI, K and Alagar, M (2021) Thermal and Morphological Analyses of Polymer Matrix Composites. In: Encyclopedia of Materials: Composites. Elsevier, pp. 1038-1068. ISBN 9780128197318, 9780128197240

Nanthakumar, S (2024) Hemp Fibre-Reinforced Polylactic Acid Composites: A Sustainable Materials for Engineering and Industry. In: Polymer Composites. Engineering Materials . Springer, Singapore, pp. 217-248. ISBN 9789819720750

Nanthakumar, S (2024) Optimisation of abrasive and corrosion behavior of AA2218 reinforced with Si3N4 / Al2O3 / ZnO2 hybrid composites: Proceedings of 2nd International Conference (RAMMML-23). In: Recent Advances in Material, Manufacturing, and Machine Learning. CRC Press, London, pp. 665-675. ISBN 9781003450252

Rajeshkumar, G (2023) Chemical modification of cellulose fiber surface. In: Cellulose Fibre Reinforced Composites. Composites Science and Engineering . Elsevier, pp. 63-72. ISBN 9780323901253, 9780323901260

Rajeshkumar, G (2021) Experimental Analysis of Tribological Behaviour of Jute Fiber-Reinforced Nanoclay Filled Epoxy Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 1-14. ISBN 9789811598098

Rajeshkumar, G (2022) Natural Fiber-Reinforced Biocomposites. In: Encyclopedia of Materials: Plastics and Polymers. Elsevier, pp. 504-510. ISBN 9780128232910

Rajeshkumar, G (2022) Novel plant, their composites and applications. In: Plant Fibers, their Composites, and Applications. Elsevier, pp. 437-456. ISBN 9780128245286

Rajeshkumar, G (2022) Recycling and Biodegradation Studies of Epoxy/Natural Fiber Composites. In: Handbook of Epoxy/Fiber Composites. Springer Nature Singapore, Singapore, pp. 837-850. ISBN 9789811936036

Rajeshkumar, G (2024) Wear Properties of Flax/Epoxy‐Based Composites With Different Machining Parameters. In: Tribological Properties, Performance and Applications of Biocomposites. Wiley, pp. 39-45. ISBN 9783527838080

Rajeshkumar, G and Arvindh Seshadri, S (2022) Mechanical behavior of elastomer blends and composites. In: Elastomer Blends and Composites. Elsevier, pp. 127-147.

Rajeshkumar, G and Karthick, M and Aseel Ahmed, A K and Vikram Raj, T and Abinaya, V and Madhu Mitha, K and Ronia Richelle, R (2023) Natural Fiber‐Based Food Packaging Films. In: Natural Materials for Food Packaging Application. Wiley, pp. 105-120. ISBN 9783527837304

Rajeshkumar, G and Naveen Kumar, K and Aravind, M and Santhosh, S and Gowtham Keerthi, T K and Arvindh Seshadri, S (2021) A Comprehensive Review on Mechanical Properties of Natural Cellulosic Fiber Reinforced PLA Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 227-237. ISBN 9789811598098

Rajeshkumar, G and Seshadri, S A (2022) PLA Based Sustainable Composites. In: Encyclopedia of Materials: Plastics and Polymers. Elsevier, pp. 520-529.

Ramesh, R (2017) Investigation of Surface Roughness and Tool Wear in End Milling of Al7075-SiC Co-continuous Composite. In: Advanced Structured Materials. Springer Verlag, pp. 315-327.

Ramesh, R (2022) Microstructural Characterisation of AA5083 in AA5083/SiC Co-Continuous Ceramic Composites (C4) Fabricated by Gravity and Gas Pressure Infiltration. In: Characterization of Minerals, Metals, and Materials 2022. The Minerals, Metals & Materials Series . Springer, pp. 57-68. ISBN 9783030923723

Ramesh, R (2021) Trend Plot Analysis of Dry Sliding Wear in Al/SiC Co-continuous Ceramic Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 93-102. ISBN 9789811598098

Senthilkumar, K (2023) 15 Effect of carbon nanotubes, aluminum hydroxide, and zinc borate on the mechanical and fire properties of epoxy nanocomposite: Processing and Applications. In: Nanocomposite and Nanohybrid Materials. De Gruyter, pp. 297-314. ISBN 9783111137902

Senthilkumar, K (2023) Epoxy Nanocomposites for Fire-Retardant Applications. In: Epoxy-Based Biocomposites. CRC Press, Boca Raton, pp. 267-285. ISBN 9781003271017

Senthilkumar, K (2023) Kenaf-Banana-Jute Fiber-Reinforced Vinyl Ester-Based Hybrid Composites. In: Vinyl Ester-Based Biocomposites. CRC Press, Boca Raton, pp. 207-224. ISBN 9781003270997

Senthilkumar, K (2023) Lightweight and sustainable materials for automotive applications. In: Lightweight and Sustainable Composite Materials. Elsevier, pp. 143-156. ISBN 9780323951890

Senthilkumar, K (2024) Tribological Properties of the Natural Fiber‐Reinforced Vinyl Ester Composites. In: Tribological Properties, Performance and Applications of Biocomposites. Wiley, pp. 65-73. ISBN 9783527838080

Thirumalai Kumaran, S (2024) Electrical Discharge Machining of Al‐B 4 C Composite for Biomedical Applications. In: Sustainable Machining and Green Manufacturing. Wiley, pp. 65-78. ISBN 9781394197866

Conference or Workshop Item

Chandramohan, G (2020) Investigations of the effect of the tool rotational speed on friction stir welded joint on aluminium metal matrix hybrid composite. In: IOP Conference Series: Materials Science and Engineering.

Book

Senthilkumar, K (2023) Epoxy-Based Biocomposites. CRC Press, Boca Raton. ISBN 9781003271017

Senthilkumar, K (2024) Tribological Properties, Performance and Applications of Biocomposites. Wiley. ISBN 9783527838080

Senthilkumar, K (2023) Vinyl Ester-Based Biocomposites. CRC Press, Boca Raton. ISBN 9781003270997

Thirumalai Kumaran, S (2022) Materials for Lightweight Constructions. CRC Press, Boca Raton. ISBN 9781003252108

Other

Thirumalai Kumaran, S (2023) Preface. CRC Press.

Thirumalai Kumaran, S (2023) Preface. CRC Press.