A

Abdul Aleem Mohamed, I and Kavikumaran, Kannadasan and Prabunathan, P and Hariharan, A and Alagar, M (2020) Synthesis and characterisation of sodium silicate from spent foundry sand: Effective route for waste utilisation. Journal of Cleaner Production, 264: 121689. ISSN 09596526

Ajith Jerome, B and Manimegalai, R and Ilayaraja, V (2020) An IoT Based Smart Water Quality Monitoring System using Cloud. In: 2020 International Conference on Emerging Trends in Information Technology and Engineering (ic-ETITE), Vellore, India.

Akila, Y (2020) Structural and photoelectrochemical characterization of heterostructured carbon sheet/Ag2MoO4-SnS/Pt photocapacitor. Journal of Photochemistry and Photobiology A: Chemistry, 401: 112784. ISSN 10106030

Alagar, M (2020) Acetophenone and thiophene side‐arm polyaryleneethynylene conjugated polymers for enrichment of electronic applications. Polymer International, 69 (4). pp. 429-438. ISSN 0959-8103

Alagar, M (2020) Development and Characterization of Palm Flower Carbon Reinforced DOPO‐Urea Diamine Based Cardanol Benzoxazine‐Epoxy Hybrid Composites. Polymer Engineering & Science, 60 (4). pp. 732-739. ISSN 0032-3888

Alagar, M (2020) Development of Prosopis juliflora carbon-reinforced PET bottle waste-based epoxy-blended bio-phenolic benzoxazine composites for advanced applications. RSC Advances, 10 (10). pp. 5656-5665. ISSN 2046-2069

Alagar, M (2020) Development of cashew nut shell carbon reinforced thiourea based biophenolic benzoxazine‐epoxy composites: High performance biobased coating materials. Polymer Composites, 41 (5). pp. 1950-1961. ISSN 0272-8397

Alagar, M (2020) Evaluation of thermo-mechanical, dielectric and corrosion resistant properties of cardanol benzoxazine-epoxy based hybrid composites: A very low temperature curing pre-polymer for high performance paint related applications. High Performance Polymers, 32 (5). pp. 524-539. ISSN 0954-0083

Alagar, M (2020) Hybrid siliconized–epoxidized EPDM/polyurethane (eEPDM -g- APTES/HTPDMS/PU) matrices for potential application in cable insulation. Polymers and Polymer Composites, 28 (8-9). pp. 589-597. ISSN 0967-3911

Alagar, M (2020) Synthesis and characterization of GO doped bio-resource based composites for NLO and multifaceted applications. Journal of Polymer Research, 27 (3): 71. ISSN 1022-9760

Avinash Kumar, R and Manoj Kumar, P (2020) Effect of channel shapes on fluid flow and heat transfer in microchannel - A numerical study. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

B

BalajI, K (2020) Efficient Flame Retardancy, Smoke Suppression, and Mechanical Enhancement of β‐FeOOH@Metallo‐Supramolecular Polymer Core–Shell Nanorod Modified Epoxy Resin. Macromolecular Materials and Engineering, 305 (10): 2000137. ISSN 1438-7492

BalajI, K (2020) Investigation on dual functional epoxy resins containing photosensitive group in the main chain for photoresist applications. International Journal of Polymer Analysis and Characterization, 25 (4). pp. 198-215. ISSN 1023-666X

BalajI, K (2020) Miscibility and sustained release of drug from cellulose acetate butyrate/caffeine films. Journal of Drug Delivery Science and Technology, 55. p. 101472. ISSN 17732247

BalajI, K (2020) Synthesis and Characterization of Liquid Crystalline Polyesters Containing α,β-unsaturated Ketone Moiety in the Main Chain Derived from 2,6-bis(4-hydroxybenzylidene)cyclohexanone. Polymer Science, Series B, 62 (3). pp. 245-255. ISSN 1560-0904

Bavithra, K (2020) Parameter optimisation of FACTS using cuckoo search algorithm for ATC enhancement in restructured power systems. International Energy Journal, 2A. pp. 247-254. ISSN 1513718X

Bhuvana, S (2020) Venture: A New Cryptocurrency for Online Marketing Application on Ethereum Framework. Journal of Advanced Research in Dynamical and Control Systems, 12 (05-SPE). pp. 498-505. ISSN 1943023X

C

Chandramohan, G (2020) Investigations of the effect of the tool rotational speed on friction stir welded joint on aluminium metal matrix hybrid composite. In: IOP Conference Series: Materials Science and Engineering.

D

Devasena, M (2020) Single-step removal of Hexavalent chromium and phenol using meso zerovalent iron. Chemosphere, 248. p. 125912. ISSN 00456535

Dinesh Kumar, G and Prabunathan, P and Manoj, M and Hariharan, A and Alagar, M (2020) Fluorine Free Bio-Based Polybenzoxazine Coated Substrates for Oil-Water Separation and Anti-Icing Applications. Journal of Polymers and the Environment, 28 (9). pp. 2444-2456. ISSN 1566-2543

H

Hariharan, A and Alagar, M (2020) Cardanol-based benzoxazine-terminated graphene oxide-reinforced fluorinated benzoxazine hybrid composites for low K applications. Composite Interfaces, 27 (8). pp. 737-751. ISSN 0927-6440

Hariharan, A and Prabunathan, P and Alagar, M (2020) Blends of Chalcone Benzoxazine and Bio-benzoxazines Coated Cotton Fabrics for Oil–Water Separation and Bio-silica Reinforced Nanocomposites for Low-k Applications. Journal of Polymers and the Environment, 28 (2). pp. 598-613. ISSN 1566-2543

Hariharan, A and Prabunathan, P and Kumaravel, A and Manoj, M and Alagar, M (2020) Bio-based polybenzoxazine composites for oil-water separation, sound absorption and corrosion resistance applications. Polymer Testing, 86: 106443. ISSN 01429418

Hariharan, A and Prabunathan, P and Manoj, M and Alagar, M (2020) Studies on heterocyclic amines based cardanol‐benzoxazine for oil‐water separation. Polymer Engineering & Science, 60 (7). pp. 1494-1506. ISSN 0032-3888

Hemkiran, S (2020) A review of similarity measures and link prediction models in social networks. International Journal of Computing and Digital Systems, 9 (2). pp. 239-248. ISSN 2210-142X

J

Jayakumar, S (2020) Te-rich Bi2Te3 thin films by electron−beam deposition: Structural, electrical, optical and thermoelectric properties. Thin Solid Films, 713: 138355. ISSN 00406090

K

Kumaravel, A (2020) Enhancement of S(IV)-Cr(VI) reaction in p-nitrophenol degradation using rice husk biochar at neutral conditions. Science of The Total Environment, 749. p. 142086. ISSN 00489697

Kumaravel, A and Mangalam, R and Jayakumar, S (2020) A novel, biocompatible and electrocatalytic stearic acid/nanosilver modified glassy carbon electrode for the sensing of paraoxon pesticide in food samples and commercial formulations. Food Chemistry, 323. p. 126814. ISSN 03088146

L

Latha, G and Hariharan, A and Prabunathan, P and Alagar, M (2020) Cardanol-Imidazole Based Benzoxazine Blends and Bio-silica Reinforced Composites with Enhanced Surface, Thermal and Dielectric Properties. Journal of Polymers and the Environment, 28 (3). pp. 918-933. ISSN 1566-2543

M

Madhavan, B and Kamerish, A and Manimegalai, R (2020) ATGP_RISC-V: Automation of Test Generator using Pluggy for RISC-V Architecture. In: 2020 Third International Conference on Smart Systems and Inventive Technology (ICSSIT), Tirunelveli, India.

Manoj, M (2020) Recent discovery and development of inhibitors targeting coronaviruses. Drug Discovery Today, 25 (4). pp. 668-688. ISSN 13596446

Manoj, M (2020) A medicinal chemistry perspective of drug repositioning: Recent advances and challenges in drug discovery. European Journal of Medicinal Chemistry, 195: 112275. ISSN 02235234

Manoj, M and Kumaravel, A and Mangalam, R and Prabunathan, P and Hariharan, A and Alagar, M (2020) Exploration of high corrosion resistance property of less hazardous pyrazolidine-based benzoxazines in comparison with bisphenol-F derivatives. Journal of Coatings Technology and Research, 17 (4). pp. 921-935. ISSN 1547-0091

Manoj Kumar, P (2020) A novel diagnostic technique to detect the failure mode operating states of an air-breathing fuel cell used in fuel cell vehicles. International Journal of Electric and Hybrid Vehicles, 12 (1). p. 32. ISSN 1751-4088

Maruthamuthu, S (2020) Colossal photosensitive boost in Schottky diode behaviour with Ce-V2O5 interfaced layer of MIS structure. Sensors and Actuators A: Physical, 315: 112333. ISSN 09244247

Maruthamuthu, S (2020) Impact of Substrate Temperature on the Properties of Rare-Earth Cerium Oxide Thin Films and Electrical Performance of p-Si/n-CeO2 Junction Diode. Journal of Inorganic and Organometallic Polymers and Materials, 30 (12). pp. 5193-5208. ISSN 1574-1443

Mohamed Iqbal, M (2020) Development of optimal reduced‐order model for gas turbine power plants using particle swarm optimization technique. International Transactions on Electrical Energy Systems, 30 (4). ISSN 2050-7038

Mohamed Iqbal, M (2020) LabVIEW-Based Virtual Laboratories for Electrical Engineering Education with Real-Time Implementation. In: Advances in Intelligent Systems and Computing. Springer, pp. 531-541. ISBN 9789811524745

Mohamed Iqbal, M (2020) Overview and Recent Scenario of Biomass Gasifier Plants in Tamilnadu—A Field Survey. In: Lecture Notes in Electrical Engineering. Springer, pp. 1303-1316. ISBN 9789811555572

Mohamed Iqbal, M (2020) Performance Analysis of ST-Type Module for Nearest Level Control Scheme Based Asymmetric 17-Level Multilevel Inverter Fed Single-Phase Induction Motor. In: Advances in Intelligent Systems and Computing. Springer, pp. 779-787. ISBN 9789811510830

Mohamed Iqbal, M (2020) Simple Cycle Gas Turbine Dynamic Analysis Using Fuzzy Gain Scheduled PID Controller. In: Advances in Intelligent Systems and Computing. Springer, pp. 77-90.

Mohanram, P V (2020) Enhancement of Static and Dynamic Characteristics on Micro-lathe Bed by the Use of Alternate Form Design and Composite Materials. In: Lecture Notes on Multidisciplinary Industrial Engineering. Springer, pp. 611-621.

Mohanram, P V (2020) Static and dynamic behavior of steel-reinforced epoxy granite CNC lathe bed using finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234 (4). pp. 595-609. ISSN 1464-4207

N

Nanthakumar, S (2020) Influence of temperature on deformation behavior of copper during microextrusion process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (9). pp. 1797-1808. ISSN 0954-4062

Navin Ganesh, V (2020) Land-use change detection and assessment for sustainable development of peri-urban areas using remote sensing and gis: A case study of coimbatore city, tamil nadu, india. Journal of Environmental Protection and Ecology, 21 (6). pp. 2229-2244. ISSN 13115065

Navin Ganesh, V and Rajkumar, R (2020) Planning of sustainable pedestrian facilities for CBD areas of Coimbatore city. Journal of Green Engineering, 10 (7). pp. 4216-4226. ISSN 19044720

Navin Ganesh, V and Sachin, E and Ravikumar, R and Sanjay Kumar, S and Vijayakumar, S (2020) Site Suitability Assessment for Neelambur Panchayat using GIS and AHP Techniques. IOP Conference Series: Materials Science and Engineering, 1006 (1). 012004. ISSN 1757-8981

Niranjani, G (2020) Modified DFA Minimization with Artificial Bee Colony Optimization in Vehicular Routing Problem with Time Windows. In: Advances in Intelligent Systems and Computing. Springer, pp. 643-662. ISBN 9789813299481

P

Pavithra, C V and Divya, R (2020) An improved intelligent controller for brushless dc motor drive based electric vehicles. Journal of Green Engineering, 10 (11). pp. 11943-11957. ISSN 19044720

Prabunathan, P (2020) Temperature dependent electrical properties of YSZ synthesized through microwave combustion. Applied Physics A, 126 (10). ISSN 0947-8396

Prabunathan, P and Dinesh Kumar, G and Manoj, M and Hariharan, A and Alagar, M (2020) Antiwetting and low-surface-energy behavior of cardanol-based polybenzoxazine-coated cotton fabrics for oil–water separation. Journal of Coatings Technology and Research, 17 (6). pp. 1455-1469. ISSN 1547-0091

Prabunathan, P and Hariharan, A and BalajI, K and Alagar, M (2020) Partially Exfoliated α-ZrP Reinforced Unsaturated Polyester Nanocomposites by Simultaneous Co-polymerization and Brønsted Acid–Base Strategy. Journal of Inorganic and Organometallic Polymers and Materials, 30 (10). pp. 4095-4105. ISSN 1574-1443

Prabunathan, P and Vasanthakumar, A and Manoj, M and Hariharan, A and Alagar, M (2020) Polypyrrole inter-layered low temperature curing benzoxazine matrices with enhanced thermal and dielectric properties. Journal of Polymer Research, 27 (3). ISSN 1022-9760

R

Rajeshkumar, G (2020) Performance of Surface Modified Pineapple Leaf Fiber and Its Applications. In: Green Energy and Technology. Springer, pp. 309-321.

Rajeshkumar, G (2020) The Role of Stacking Order on Mechanical Properties of Glass/Carbon Reinforced Epoxy Hybrid Composites Prepared by Resin Infusion Technique. Materials Today: Proceedings, 22. pp. 2446-2451. ISSN 22147853

Rajeshkumar, G (2020) An experimental study on the interdependence of mercerization, moisture absorption and mechanical properties of sustainable Phoenix sp. fibre-reinforced epoxy composites. Journal of Industrial Textiles, 49 (9). pp. 1233-1251. ISSN 1528-0837

Rajeshkumar, G and Harikrishna, A M and Ajithkumar, S (2020) A Comprehensive Review on Manufacturing Methods and Characterization of Al6061 Composites. Materials Today: Proceedings, 22. pp. 2597-2605. ISSN 22147853

Rajeshkumar, G and Vishnupriyan, R and Selvadeepak, S (2020) Tissue Mimicking Material an Idealized Tissue Model for Clinical Applications: A Review. Materials Today: Proceedings, 22. pp. 2696-2703. ISSN 22147853

Rajkumar, R (2020) Impact of urbanisation on formation of urban heat island in Tirupur region using geospatial technique. Indian Journal of Geo-Marine Sciences, 49 (9). pp. 1593-1598. ISSN 25826506

Rajkumar, R and Magesh Kumaran, M and Mathan Prasath, R K and Senthilshanmugavelayutham, S P (2020) Agro-Climatic Zonation for Tamil Nadu Using GIS and AHP Techniques. IOP Conference Series: Materials Science and Engineering, 1006 (1). 012015. ISSN 1757-8981

Rajkumar, V (2020) Effect of 3D printing on supply chain management. Materials Today: Proceedings, 21. pp. 958-963. ISSN 22147853

Rajkumar, V (2020) Evaluation of mechanical properties of aluminium 6063 - Borosilicate reinforced metal matrix composite. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Rajkumar, V (2020) Transient thermal finite element simulation of moving gas tungsten arc welding on AISI 4340 aeronautical steel. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Rajkumar, V (2020) A systematic review of effect of different welding process on mechanical properties of grade 5 titanium alloy. Materials Today: Proceedings, 21. pp. 948-953. ISSN 22147853

Ramesh, R (2020) Ballistic Testing and Simulation of Co-continuous Ceramic Composite for Body Armour. International Journal of Engineering, 33 (9). pp. 1792-1796. ISSN 24237167

Ramesh, R and Krishna, R and Koushik Sundaram, K and Arul Mozhi Selvan, R and Abhishek, Roy (2020) Experimental and numerical analysis of compression behaviour of 3D printed metal foams. Journal of Physics: Conference Series, 1706 (1). 012213. ISSN 1742-6588

Reba, P and Janani, N and Jaisri, A and Shunmuga Bhagya Shri, T and Swathi, S (2020) Generalized Quadrature Spatial Modulation aided Millimetre Wave MIMO. In: 2020 IEEE 3rd 5G World Forum (5GWF), Bangalore, India.

S

Santhana, V and Thangaraju, D and Jayakumar, S (2020) Development of Hybrid TiO2/Paint Sludge Extracted Microbe Composite for Enhanced Photocatalytic Dye Degradation. Journal of Inorganic and Organometallic Polymers and Materials, 30 (7). pp. 2805-2813. ISSN 1574-1443

Santhana, Vedi and Thangaraju, D (2020) Synthesis and emission characteristics of lead-free novel Cs4SnBr6/SiO2 nanocomposite. Materials Letters, 280: 128562. ISSN 0167577X

Santhanamari, G and Premi, J and Rahavi, S and Sai Iswarya, M and Vijay, S (2020) Health Monitoring of Soldiers Using Efficient Manet Protocol. In: 2020 IEEE Recent Advances in Intelligent Computational Systems (RAICS), Thiruvananthapuram, India.

Sathiyanathan, M (2020) Enhancement of Voltage Profile of Power Line by the Placement of Multi-line FACTS Devices. Journal of Advanced Research in Dynamical and Control Systems, 12 (7). pp. 114-124. ISSN 1943023X

Shanthini, M and Vidya, G and Arun, R (2020) IoT Enhanced Smart Door Locking System. In: 2020 Third International Conference on Smart Systems and Inventive Technology (ICSSIT), Tirunelveli, India.

Sivananda Devi, K (2020) Process enhancement in a wet grinder manufacturing company through lean implementation framework - a case study. International Journal of Business Excellence, 22 (1). p. 33. ISSN 1756-0047

T

Thangaraju, D (2020) Fabrication of high-performance SiO2@p-CuO/n-Si core-shell structure based photosensitive diode for photodetection application. Surfaces and Interfaces, 20: 100622. ISSN 24680230

Thangaraju, D and Santhana, V and Jayakumar, S (2020) Solvent influenced synthesis of single-phase SnS 2 nanosheets for solution-processed photodiode fabrication. CrystEngComm, 22 (3). pp. 525-533. ISSN 1466-8033

Thenmozhi, A and Devasena, M (2020) Remediation of 2,4,6-trinitrotoluene Persistent in the Environment – A review. Soil and Sediment Contamination: An International Journal, 29 (1). pp. 1-13. ISSN 1532-0383

Thivaharan, S (2020) A Survey on Python Libraries Used for Social Media Content Scraping. In: 2020 International Conference on Smart Electronics and Communication (ICOSEC), Trichy, India.

Y

Yogabalaji, G and Kirubhakaran, S and Vivekanandhan, M and Saranyadevi, D (2020) Research Analysis of Paper Sludge and Paper Ash Bricks. IOP Conference Series: Materials Science and Engineering, 955 (1). 012057. ISSN 1757-8981