A

Abdul Aleem Mohamed, I (2018) Enhancement of durability characteristics of geopolymer concrete with manufactured sand. In: Sixth International Conference on Durability of Concrete Structures, 18 - 20 July, 2018, United Kingdom.

Arun, M (2018) Strength and behaviour of geogrid reinforced concrete beams. International Journal of Civil Engineering and Technology, 9 (6): IJCIET_09. pp. 1295-1303. ISSN 0976-6308

C

Chandramohan, G (2018) Case Study on Effective Use of Mind Map in Engineering Education. In: 2018 IEEE Ninth International Conference on Technology for Education (T4E), Chennai.

Chandramohan, G (2018) Production and characterization of mechanical and microstructural behaviour of friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles. Journal of Ceramic Processing Research, 19 (1). pp. 69-74. ISSN 1229-9162

E

Elangovan, D (2018) Real time implementation and validation of lean implementation model for sustainability (LIMS) in medium scale industry. International Journal of Engineering & Technology, 7 (3.29). p. 16. ISSN 2227-524X

J

Jothibasu, M and Malar, E (2018) Improved reversible data hiding through image using different hiding and compression techniques. International Journal of Innovative Technology and Exploring Engineering, 8 (2S2). pp. 327-330. ISSN 2278-3075

M

Mangalam, R (2018) Preparation and characterization of blend polymer electrolyte film based on poly(vinyl alcohol)-poly(acrylonitrile)/MgCl2 for energy storage devices. Ionics, 24 (4). pp. 1083-1095. ISSN 0947-7047

Mangalam, R (2018) A study on blend polymer electrolyte based on poly(vinyl alcohol)-poly (acrylonitrile) with magnesium nitrate for magnesium battery. Ionics, 24 (11). pp. 3493-3506. ISSN 0947-7047

Manoj Kumar, P (2018) Experimental validation of an improved parametric model for an air breathing fuel cell. Journal of Advanced Research in Dynamical and Control Systems, 10 (2). pp. 358-368. ISSN 1943-023X

Manoj Kumar, P (2018) Nanoscale, Catalyst Support Materials for Proton-Exchange Membrane Fuel Cells. In: Handbook of Nanomaterials for Industrial Applications. Elsevier, pp. 468-495.

Manoj Kumar, P (2018) Parametric study of the proton exchange membrane fuel cell for investigation of enhanced performance used in fuel cell vehicles. Alexandria Engineering Journal, 57 (4). pp. 3953-3958. ISSN 11100168

Manoj Kumar, P (2018) Triple phase boundary augmentation in hierarchical, Pt grafted N-doped mesoporous carbon nanofibers for high performance and durable PEM fuel cells. Journal of Materials Chemistry A, 6 (26). pp. 12768-12781. ISSN 2050-7488

P

Pavithra, C V (2018) Bidirectional three port converter for power flow management of PV/Battery-Fed elevator system. Journal of Vibroengineering, 20 (1). pp. 732-747. ISSN 1392-8716

R

Rajeshkumar, G (2018) Effect of Matrix Material on the Free Vibration Characteristics of Phoenix sp. Fiber Reinforced Polymer Matrix Composites. Materials Today: Proceedings, 5 (5). pp. 11227-11232. ISSN 22147853

Ramesh, R (2018) Taguchi Grey Relational Analysis for Multi-Response Optimization of Wear in Co-Continuous Composite. Materials, 11 (9). p. 1743. ISSN 1996-1944

Reba, P (2018) Multiple Antenna Selection for Underlay Cognitive Radio Systems with Interference Constraint. Wireless Personal Communications, 98 (1). pp. 1505-1520. ISSN 0929-6212

Reba, P (2018) Performance Investigation of Interference Alignment Techniques for Underlay MIMO Cognitive Radio Networks. In: 2018 15th IEEE India Council International Conference (INDICON), Coimbatore, India.

S

Saravanakumar, N (2018) CORROSION BEHAVIOR OF A Ni–TiO2 NANOCOMPOSITE COATED BY PULSE ELECTRODEPOSITION. High Temperature Material Processes An International Quarterly of High-Technology Plasma Processes, 22 (4). pp. 219-229. ISSN 1093-3611

Saravanakumar, N (2018) Influence of Ag Nanoparticles for the Anti-wear and Extreme Pressure Properties of the Mineral Oil Based Nano-cutting Fluid. Tribology in Industry, 40 (3). pp. 440-447. ISSN 03548996

Sasikiran, P and Nagarjun, J (2018) Analysis and Evaluation of Different Heat Treatment Fixture Designs Inspired from 3D Infill Patterns. In: Lecture Notes in Mechanical Engineering. Pleiades journals, pp. 393-401.

Sasikiran, P and Nagarjun, J (2018) Analysis and evaluation of different heat treatment fixture designs inspired from 3D infill patterns. In: Advances in Manufacturing Processes. Lecture Notes in Mechanical Engineering, Singapore.

Sivananda Devi, K (2018) Lean manufacturing concepts in wet grinder assembly line through value state mapping. International Journal of Services and Operations Management, 30 (3). p. 357. ISSN 1744-2370

Subash Kumar, C S (2018) Digital implementation of modified phase locked loop based harmonic extraction for shunt active filter. Journal of Vibroengineering, 20 (4). pp. 1897-1906. ISSN 1392-8716

Sumathi, A C (2018) Study of CR Based U-LTE Co-existence Under Varying Wi-Fi Standards. In: 6th International Conference on Frontier Computing, FC 2017, 12 July 2017 through 14 July 2017.

U

Umadevi, R (2018) Cost effective solitary stage single phase inverter for solar PV integration in to grid. International Journal of Renewable Energy Research, 8 (3). pp. 1309-1317. ISSN 1309-0127