Book Section

UNSPECIFIED (2024) Front Matter. In: Thirumalai Kumaran, S (ed.) Sustainable Machining and Green Manufacturing. Wiley. ISBN 9781394197866

Abhi, C and Sugumaran, R and Prem Kumar, T (2023) Pipe Flow Management and Leak Detection with Sensors. In: Fluid Mechanics and Fluid Power. Lecture Notes in Mechanical Engineering, 1 . Springer, Singapore, pp. 331-336. ISBN 9789811970542

Abhishek, J and Moulieswaran, S and Nirmal Raj, S and Pradeep, S and Manoj Kumar, P (2023) Parametric Studies on Screen-Splitted Air-Conditioned Room for Reduced Energy Consumption. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 731-737. ISBN 9789811930522

Adhavan, B (2022) High-Performance ANFIS-Based Controller for BLDC Motor Drive. In: Ubiquitous Intelligent Systems. Smart Innovation, Systems and Technologies (243). Springer, Singapore, pp. 435-449. ISBN 9789811636752

Adhavan, B (2022) Sensorless Speed Control of BLDC Motor for EV Applications. In: Sustainable Communication Networks and Application. Lecture Notes on Data Engineering and Communications Technologies (93). Springer, Singapore, pp. 359-370. ISBN 9789811666049

Adhavan, B and Mohamed Iqbal, M (2023) Performance Analysis of SOC Estimation Approaches for Lithium-Ion Batteries. In: ICT with Intelligent Applications. Lecture Notes in Networks and Systems (719). Springer, Singapore, pp. 493-503. ISBN 9789819937578

Alagar, M (2021) POSS nanoparticles: Synthesis, characterization, and properties. In: Polyhedral Oligomeric Silsesquioxane (POSS) Polymer Nanocomposites. Elsevier, pp. 1-25.

Alagar, M (2021) Polymer Matrix Composite Materials for Aerospace Applications. In: Encyclopedia of Materials: Composites. Elsevier, pp. 947-969.

Alagar, M (2021) Spectroscopic analysis of POSS polymer nanocomposites. In: Polyhedral Oligomeric Silsesquioxane (POSS) Polymer Nanocomposites. Elsevier, pp. 243-280. ISBN 9780128213476

Avinash Kumar, R and Manoj Kumar, P and Balaji, M (2023) Numerical Investigation on Heat Transfer Enhancement in Microchannels Through Micro-orifice Induced Cavitation. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 703-717. ISBN 9789811930522

Dhivya, S (2023) The Role of Bioengineering in Healthcare:. In: Handbook of Research on Advanced Functional Materials for Orthopedic Applications. IGI Global, pp. 279-298. ISBN 9781668474129

Divya, R and Pavithra, C V (2023) Investigation of various solar MPPT techniques in solar panel. In: Machine Learning and the Internet of Things in Solar Power Generation. CRC Press, Boca Raton, pp. 55-74. ISBN 9781003302964

Divyah, N (2024) Gamma radiation shielding properties of steel, basalt, and steel-basalt hybrid fiber reinforced copper slag concrete. In: Innovations and Applications of Fiber-Reinforced Concrete. Nova Science Publishers, Inc., pp. 55-79. ISBN 9798891135291, 9798891134652

Elangovan, D (2023) Comparisonal Analysis of “V” Punches with Various Radii and Its Impact on the Steel Material Used for Sheet Metal Operations. In: Materials, Design and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 113-121. ISBN 9789811930522

Elangovan, D (2021) Effective Supply Chain Management by Using the Data-Based Decision Support System. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 539-547. ISBN 9789811598098

Elangovan, D (2023) Experimental Investigations of Composite Material Using Bamboo Fiber Reinforced with Polypropylene Plastic Additives. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 351-362. ISBN 9789811930522

Elangovan, D (2021) Hardfacing of Ni-Based Alloys on Medium Carbon Steel to Improve Turbine Blade Properties. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 515-523. ISBN 9789811598098

Elangovan, D (2023) Studies of Effects of Pollutants M Sand, Wood Ash, Rice Husk Ash and Graphene on Mechanical Properties of Recycled Aluminium. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 105-112. ISBN 9789811930522

Elangovan, D and Vishnupriyan, R (2021) Development of Supply Chain Risk Management Strategies for Mitigating Loss Prevention in Manufacturing Organizations. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 525-538. ISBN 9789811598098

Giriprasath, K S and Santhosh, C (2024) Revolutionizing Drug Development: Navigating the Convergence of Artificial Intelligence and Pharmaceutical Innovation. In: Analyzing Explainable AI in Healthcare and the Pharmaceutical Industry. IGI Global, pp. 154-180. ISBN 9798369354704

Gomathi, B (2024) Advancement in physical education teaching and assessment based on human-computer interaction with deep learning. In: Digital Analytics Applications for Sustainable Training and Education. Apple Academic Press, New York, pp. 377-398. ISBN 9781032713366

Gomathi, B (2024) Deep Learning-Based Smart Healthcare System for Patient's Discomfort Detection: Trends, Challenges and Applications. In: Deep Learning for Smart Healthcare. Auerbach Publications, Boca Raton, pp. 107-128. ISBN 9781003469605

Gomathi, B and Lokesh, S (2023) Task Scheduling Algorithm Using Improved PSO in Dew Computing. In: Micro-Electronics and Telecommunication Engineering. Lecture Notes in Networks and Systems . Springer, Singapore, pp. 317-324. ISBN 9789811995118

Gomathi, B and Manimegalai, R and Sri Rajiv Jegan, G V and Venkateshwaran, M (2024) Evolvable Hardware Using Genetic Algorithm. In: 6th EAI International Conference on Big Data Innovation for Sustainable Cognitive Computing (BDCC 2023). Springer Innovations in Communication and Computing . Springer, Singapore, pp. 65-76. ISBN 9783031546952

Gowsika, D and Ashwin Kumar, S and Chandra Prakash, S and Reba, P (2023) Low power designs for enhanced CMOS performance. In: Low Power Designs in Nanodevices and Circuits for Emerging Applications. CRC Press, Boca Raton, pp. 213-253. ISBN 9781003459231

Hariharan, A and BalajI, K and Alagar, M (2021) Thermal and Morphological Analyses of Polymer Matrix Composites. In: Encyclopedia of Materials: Composites. Elsevier, pp. 1038-1068. ISBN 9780128197318, 9780128197240

Hemanth, G R (2021) Introduction to Smart Grid. In: Integration of Renewable Energy Sources with Smart Grid. Wiley, pp. 37-75. ISBN 9781119751908

Hemkiran, S and Prasanna Rahavendra, A and Anjhanna, A K (2022) Design of Automatic Credit Card Approval System Using Machine Learning. In: Artificial Intelligence and Technologies. Lecture Notes in Electrical Engineering (806). Springer, Singapore, pp. 1-9. ISBN 9789811664472

Ilango, P (2023) A Performance Study of Prediction Models for Diabetes Prediction Using Machine Learning. In: Computational Methods and Data Engineering. Lecture Notes on Data Engineering and Communications Technologies (139). Springer, Singapore, pp. 41-53. ISBN 9789811930140

Jagadeesh, B (2024) Roadmap to Achieve Sustainable and Eco-Friendly Metal Additive Manufacturing Processes:. In: Futuristic Technology for Sustainable Manufacturing. IGI Global, pp. 185-215. ISBN 9798369318621

Jayasanthi, M (2023) Visible Light Communication-Based Internet of Things for Healthcare:. In: Technological Tools for Predicting Pregnancy Complications. IGI Global, pp. 37-54. ISBN 9798369317198

Jayasri, P A and Manimegalai, R and Reshmah, C S and Vaishnavi, S (2024) Evaluation of Weather Forecasting Models and Handling Anomalies in Short-Term Wind Speed Data. In: Advances in Distributed Computing and Machine Learning. ICADCML 2024. Lecture Notes in Networks and Systems (955). Springer, Singapore, pp. 137-147. ISBN 9789819718412

Jayesh Balaji, K and Koushik Sundaram, K and Hareesh, S P and Arun Sundar, S and Naveen, R (2021) Implementing Canonical CFD Techniques to Determine the Effect of Optimised Aerodynamic Coefficients on the Performance of a Car for a Given Race Track. In: Fluid Mechanics and Fluid Power. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 683-691. ISBN 9789811606984

Josephine, R L (2017) Cost Optimization of a Ring Frame Unit. In: Lecture Notes in Electrical Engineering. Springer Verlag, pp. 107-117.

Jothibasu, M and Sowmiya, M and Harsha, R and Naveen, K S and Suriyaprakash, T B (2023) Improvement of computer vision-based elephant intrusion detection system (EIDS) with deep learning models. In: Innovative Engineering with AI Applications. Wiley Blackwell, pp. 131-153. ISBN 9781119792161

Kowsalyadevi, A K (2021) Route optimization for perishable goods transportation system. In: Machine Learning Paradigm for Internet of Things Applications. Wiley, pp. 167-179. ISBN 9781119763499

Kowsalyadevi, A K and Jayasanthi, M and Pavithra, C V and Divya, R and Archana, D (2023) Smart transportation for bus travellers and identifying the optimal insurance premium using Internet of Things. In: Blockchain Enabled Secure Big Data Computing for Smart Cities Using Internet of Things. Nova Science Publishers, Inc., pp. 259-278. ISBN 9798891132801

Kumaravel, A (2024) Carbon nanotubes-based sensors to detect environmental contaminants. In: Nanotechnology-based Sensors for Detection of Environmental Pollution. Elsevier, pp. 349-370.

Lakshmi, K (2017) A Robust Energy Management System for Smart Grid. In: Advances in Intelligent Systems and Computing. Springer Verlag, pp. 423-435.

Lokesh, S (2022) An Enhanced Method for Running Embedded Applications in a Power-Efficient Manner:. In: Energy Systems Design for Low-Power Computing. IGI Global, pp. 257-277. ISBN 9781668449769

Lokesh, S (2022) Wireless Sensor and Actuator Networks-Based Reliable Data Acquisition Mechanism:. In: Energy Systems Design for Low-Power Computing. IGI Global, pp. 187-213. ISBN 9781668449769

Maha Vishnu, V C (2019) Efficient GWR Solution by TR and CA. In: Communications in Computer and Information Science. Springer Verlag, pp. 484-492. ISBN 9789811391804

Manimegalai, R (2024) Authentication Techniques for Human Monitoring in Closed Environment. In: Blockchain and IoT based Smart Healthcare Systems. BENTHAM SCIENCE PUBLISHERS, pp. 260-279. ISBN 9789815196290

Manimegalai, R (2022) BABW: Biometric‐Based Authentication Using DWT and FFNN: Applications of Artificial Intelligence and Soft Computing Techniques. In: Tele‐Healthcare. Wiley, pp. 201-219. ISBN 9781119841937

Manimegalai, R (2023) Certichain: A blockchain-based framework for document verification. In: Blockchain Enabled Secure Big Data Computing for Smart Cities Using Internet of Things. Nova Science Publishers, Inc., pp. 203-214. ISBN 9798891132801

Manimegalai, R (2022) Program Architecture for Structural Health Monitoring of Pamban Bridge. In: Computational Intelligence, Cyber Security and Computational Models. Recent Trends in Computational Models, Intelligent and Secure Systems. ICC3. Communications in Computer and Information Science, 1631 (1631). Springer, Cham, pp. 18-30. ISBN 9783031155550

Manimegalai, R (2022) Transport Tracking Using RFID and GSM Based Technique. In: IoT and Analytics for Sensor Networks. Lecture Notes in Networks and Systems (244). Springer, Singapore, pp. 225-234. ISBN 9789811629181

Manimegalai, R and Megadarshini, V and Gomathi, B (2024) Zero Watermarking and Data Authentication. In: 6th EAI International Conference on Big Data Innovation for Sustainable Cognitive Computing, BDCC 2023. EAI/Springer Innovations in Communication and Computing . Springer, Singapore, pp. 77-88. ISBN 9783031546952

Manoj, M and Ajith Jerome, B (2021) Candidate Drugs for the Potential Treatment of Coronavirus Diseases. In: In Silico Modeling of Drugs Against Coronaviruses. Methods in Pharmacology and Toxicology. Humana . Springer, New York, pp. 85-114. ISBN 9781071613665

Manoj Kumar, P (2018) Nanoscale, Catalyst Support Materials for Proton-Exchange Membrane Fuel Cells. In: Handbook of Nanomaterials for Industrial Applications. Elsevier, pp. 468-495.

Manoj Kumar, P (2021) Technological risks and durability issues for the Proton Exchange Membrane Fuel Cell technology. In: PEM Fuel Cells. Elsevier, pp. 279-314.

Mohamed Iqbal, M (2024) Designing Compensators for Reduced Order Systems Using Genetic Algorithms. In: Power Engineering and Intelligent Systems. Lecture Notes in Electrical Engineering, 1098 . Springer Science and Business Media Deutschland GmbH, pp. 379-389. ISBN 9789819973828

Mohamed Iqbal, M (2020) LabVIEW-Based Virtual Laboratories for Electrical Engineering Education with Real-Time Implementation. In: Advances in Intelligent Systems and Computing. Springer, pp. 531-541. ISBN 9789811524745

Mohamed Iqbal, M (2024) Operation and Control of EV Infrastructure for Microgrid. In: Microgrids for Commercial Systems. Wiley, pp. 345-379. ISBN 9781394167319, 9781394166305

Mohamed Iqbal, M (2020) Overview and Recent Scenario of Biomass Gasifier Plants in Tamilnadu—A Field Survey. In: Lecture Notes in Electrical Engineering. Springer, pp. 1303-1316. ISBN 9789811555572

Mohamed Iqbal, M (2020) Performance Analysis of ST-Type Module for Nearest Level Control Scheme Based Asymmetric 17-Level Multilevel Inverter Fed Single-Phase Induction Motor. In: Advances in Intelligent Systems and Computing. Springer, pp. 779-787. ISBN 9789811510830

Mohamed Iqbal, M (2020) Simple Cycle Gas Turbine Dynamic Analysis Using Fuzzy Gain Scheduled PID Controller. In: Advances in Intelligent Systems and Computing. Springer, pp. 77-90.

Mohanram, P V (2020) Enhancement of Static and Dynamic Characteristics on Micro-lathe Bed by the Use of Alternate Form Design and Composite Materials. In: Lecture Notes on Multidisciplinary Industrial Engineering. Springer, pp. 611-621.

Nagarjun, J and Prem Kumar, T and Suraj, S and Vivek, S (2023) Start/Stop Behavior of Indian Two-Wheeler Commuters in Traffic Signals: Repercussions and Propositions. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 577-587. ISBN 9789811930522

Nanthakumar, S (2024) Enhancement of Dehydrating of a Mixed Mode Solar Dehydrator with Regenerative Heat Storage System. In: Scientific and Technological Advances in Materials for Energy Storage and Conversions. FLUTE 2023. Springer, Singapore, pp. 599-607. ISBN 9789819724819

Nanthakumar, S (2024) Hemp Fibre-Reinforced Polylactic Acid Composites: A Sustainable Materials for Engineering and Industry. In: Polymer Composites. Engineering Materials . Springer, Singapore, pp. 217-248. ISBN 9789819720750

Nanthakumar, S (2024) Optimisation of abrasive and corrosion behavior of AA2218 reinforced with Si3N4 / Al2O3 / ZnO2 hybrid composites: Proceedings of 2nd International Conference (RAMMML-23). In: Recent Advances in Material, Manufacturing, and Machine Learning. CRC Press, London, pp. 665-675. ISBN 9781003450252

Nanthakumar, S (2023) Role of Artificial Intelligence in Making Wearable Robotics Smarter: Smart Industries and Intelligent Technologies. In: Robotics and Automation in Industry 4.0: Smart Industries and Intelligent Technologies. CRC Press, Boca Raton, pp. 152-174. ISBN 9781003317456

Nanthakumar, S (2024) Square Pyramid and Single Slope Solar Still: Experimental Analysis for Various Depth of Water. In: Scientific and Technological Advances in Materials for Energy Storage and Conversions, FLUTE 2023. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 29-39. ISBN 9789819724819

Nanthakumar, S and Vemula, Prudhvi and Narendraraj, S and Mowlieswaran, V P (2023) Investigation of Microscale Plastic Deformation Behavior of Copper Microgear in Forward Microextrusion Process. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 523-534. ISBN 9789811930522

Naveen, R and Prem Kumar, T and Sridharan, K and Sandheep, D (2021) Design and Fabrication of a Portable Stagnant Water Drainer. In: Fluid Mechanics and Fluid Power. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 445-451. ISBN 9789811606984

Navin Ganesh, V (2022) Experimental Investigation on the Effect of Polypropylene Fibers with Respect to the Fatigue Behavior of Rigid Pavement. In: Recent Developments in Sustainable Infrastructure (ICRDSI-2020)—GEO-TRA-ENV-WRM. Lecture Notes in Civil Engineering (207). Springer, Singapore, pp. 383-395. ISBN 9789811675089

Nidhya, R and Abdul Aleem Mohamed, I and Arun, M (2024) Unveiling the Promise of Phase Change Materials in Geopolymer Composites: A Comprehensive Review. In: Next Generation Materials for Sustainable Engineering. IGI Global, pp. 11-39. ISBN 9798369313077

Nidhya, R and Arun, M and Abdul Aleem Mohamed, I (2024) NanoMaterial: Fortifying Civil and Infrastructure With Next-Gen Corrosion Inhibition - A Review. In: Sustainability, Safety, and Applications of Nanomaterials-Based Corrosion Inhibitors. IGI Global, pp. 51-65. ISBN 9798369376423

Niranjani, G (2020) Modified DFA Minimization with Artificial Bee Colony Optimization in Vehicular Routing Problem with Time Windows. In: Advances in Intelligent Systems and Computing. Springer, pp. 643-662. ISBN 9789813299481

Paldurai, K (2023) Comparison of Advanced Encryption Standard Variants Targeted at FPGA Architectures. In: Intelligent Systems and Machine Learning. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 2022 . Springer, Singapore, pp. 346-355. ISBN 9783031350771

Perumal, P (2021) High Performance Concrete Mixed with Combinations of Mineral Admixtures. In: Recent Trends in Civil Engineering. Lecture Notes in Civil Engineering (77). Springer, Singapore, pp. 563-572. ISBN 9789811551956

Prabhu, A (2019) Performance Analysis of Encryption Algorithms with Pat-Fish for Cloud Storage Security. In: Lecture Notes in Electrical Engineering. Springer, Singapore, pp. 111-120. ISBN 9789811310584

Prem Kumar, T (2023) MATLAB Simulation of 500 W Direct Methanol Fuel Cell Stack. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 693-701. ISBN 9789811930522

Prem Kumar, T and Hariharan, V and Manojkumar, S (2021) Effect of Dodecagon Shape Frustum Concentrator and Internal Fins in 2 in 1 Box-Type Solar Cooker. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 653-664. ISBN 9789811598098

Prem Kumar, T and Sai Subramanian, P and Naresh, G (2021) Design and Analysis of Flow Field Patterns in Bipolar Plates of a Proton Exchange Membrane Fuel Cell. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 549-561. ISBN 9789811598098

Rajeshkumar, G (2023) Chemical modification of cellulose fiber surface. In: Cellulose Fibre Reinforced Composites. Composites Science and Engineering . Elsevier, pp. 63-72. ISBN 9780323901253, 9780323901260

Rajeshkumar, G (2021) Experimental Analysis of Tribological Behaviour of Jute Fiber-Reinforced Nanoclay Filled Epoxy Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 1-14. ISBN 9789811598098

Rajeshkumar, G (2021) Fault Diagnosis of Unbalanced Multirotor System. In: Recent Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 387-396. ISBN 9789811575570

Rajeshkumar, G (2022) Natural Fiber-Reinforced Biocomposites. In: Encyclopedia of Materials: Plastics and Polymers. Elsevier, pp. 504-510. ISBN 9780128232910

Rajeshkumar, G (2022) Novel plant, their composites and applications. In: Plant Fibers, their Composites, and Applications. Elsevier, pp. 437-456. ISBN 9780128245286

Rajeshkumar, G (2020) Performance of Surface Modified Pineapple Leaf Fiber and Its Applications. In: Green Energy and Technology. Springer, pp. 309-321.

Rajeshkumar, G (2022) Recycling and Biodegradation Studies of Epoxy/Natural Fiber Composites. In: Handbook of Epoxy/Fiber Composites. Springer Nature Singapore, Singapore, pp. 837-850. ISBN 9789811936036

Rajeshkumar, G (2024) Wear Properties of Flax/Epoxy‐Based Composites With Different Machining Parameters. In: Tribological Properties, Performance and Applications of Biocomposites. Wiley, pp. 39-45. ISBN 9783527838080

Rajeshkumar, G and Aakash Balaji, B and Arvindh Seshadri, S (2023) Compression and injection molding techniques. In: Cellulose Fibre Reinforced Composites. Elsevier, pp. 165-181.

Rajeshkumar, G and Arvindh Seshadri, S (2021) Influence of Phoenix sp. Fiber Content on the Viscoelastic Properties of Polymer Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 131-139. ISBN 9789811598098

Rajeshkumar, G and Arvindh Seshadri, S (2022) Mechanical behavior of elastomer blends and composites. In: Elastomer Blends and Composites. Elsevier, pp. 127-147.

Rajeshkumar, G and Arvindh Seshadri, S and Ronia Richelle, R and Madhu Mitha, K and Abinaya, V (2022) Production of biodegradable films and blends from proteins. In: Biodegradable Polymers, Blends and Composites. Composites Science and Engineering . Elsevier, pp. 681-692.

Rajeshkumar, G and Karthick, M (2023) Bidirectional Jute-Reinforced Polyester Composites: Influence of Sodium Bicarbonate Treatment on Static Mechanical Properties. In: Materials, Design and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 143-151. ISBN 9789811930522

Rajeshkumar, G and Karthick, M and Aseel Ahmed, A K and Vikram Raj, T and Abinaya, V and Madhu Mitha, K and Ronia Richelle, R (2023) Natural Fiber‐Based Food Packaging Films. In: Natural Materials for Food Packaging Application. Wiley, pp. 105-120. ISBN 9783527837304

Rajeshkumar, G and Naveen Kumar, K and Aravind, M and Santhosh, S and Gowtham Keerthi, T K and Arvindh Seshadri, S (2021) A Comprehensive Review on Mechanical Properties of Natural Cellulosic Fiber Reinforced PLA Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 227-237. ISBN 9789811598098

Rajeshkumar, G and Seshadri, S A (2022) PLA Based Sustainable Composites. In: Encyclopedia of Materials: Plastics and Polymers. Elsevier, pp. 520-529.

Rajkumar, V (2021) Classification of Rice Grains Based on Quality Using Probabilistic Neural Network. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 867-886. ISBN 9789811598098

Rajkumar, V (2021) Concrete Bridge Crack Detection Using Convolutional Neural Network. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 797-812. ISBN 9789811598098

Rajkumar, V (2021) Experimental Investigation on Tool Wear Using Sub-zero Treated Insert in Turning of EN 24 Steel. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 903-912. ISBN 9789811598098

Rajkumar, V (2023) Investigational on Biodiesel Exploitation Orange Peel Oil After CI Engine. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 679-691. ISBN 9789811930522

Rajkumar, V (2023) Performance Analysis of Vortex Tube Refrigeration System by Experimental Method. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 669-677. ISBN 9789811930522

Rajkumar, V (2023) Preface, Materials, Design and Manufacturing for Sustainable Environment. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 9789811930522

Rajkumar, V and Mirdula, R and Suji, D (2023) Prediction of Strength and Durability Characteristics of Rice Husk Ash Concrete Using Artificial Neural Network (ANN). In: Materials, Design and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 181-191. ISBN 9789811930522

Ramesh, R (2017) Investigation of Surface Roughness and Tool Wear in End Milling of Al7075-SiC Co-continuous Composite. In: Advanced Structured Materials. Springer Verlag, pp. 315-327.

Ramesh, R (2022) Microstructural Characterisation of AA5083 in AA5083/SiC Co-Continuous Ceramic Composites (C4) Fabricated by Gravity and Gas Pressure Infiltration. In: Characterization of Minerals, Metals, and Materials 2022. The Minerals, Metals & Materials Series . Springer, pp. 57-68. ISBN 9783030923723

Ramesh, R (2023) Preface, Lecture Notes in Mechanical Engineering. In: Advances in Modern Machining Processes. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 9789811971495

Ramesh, R (2021) Trend Plot Analysis of Dry Sliding Wear in Al/SiC Co-continuous Ceramic Composites. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 93-102. ISBN 9789811598098

Ravikrishna, S and Subash Kumar, C S (2022) Battery Life and Electric Vehicle Range Prediction. In: Smart Systems for Industrial Applications. Wiley, pp. 249-268. ISBN 9781119762010

Resma Madhu, P K (2024) Investigation of Various Data-Driven Modeling Techniques for an Industrial Heat Exchanger. In: Lecture Notes in Networks and Systems. Springer, Singapore, pp. 563-580. ISBN 9789819732418

Sanjana Chelot, Menon (2022) Applications of Distributed Ledger (Blockchain) Technology in E-Healthcare:. In: The Internet of Medical Things (IoMT) and Telemedicine Frameworks and Applications. IGI Global, pp. 248-261. ISBN 9781668435342, 9781668435335

Sanjana Chelot, Menon (2022) Preserving Privacy of Patients With Disabilities in the Smart Healthcare Systems:. In: Using Multimedia Systems, Tools, and Technologies for Smart Healthcare Services. IGI Global, pp. 191-205. ISBN 9781668457412

Sanjana Chelot, Menon (2023) Robots, Cyborgs, and Modern Society: Future of Society 5.0. In: Robotic Process Automation. Wiley, pp. 243-258. ISBN 9781394166954

Sanjana Chelot, Menon (2023) The Role of Artificial Intelligence, Blockchain, and Internet of Things in Next Generation Machine Based Communication. In: Robotic Process Automation. Wiley, pp. 225-241. ISBN 9781394166954

Sanjana Chelot, Menon and Umayal, V R (2022) A Visual Framework for an IoT-Based Healthcare System Based on Cloud Computing:. In: Using Multimedia Systems, Tools, and Technologies for Smart Healthcare Services. IGI Global, pp. 83-95. ISBN 9781668457412

Sankarasubramanian, R S (2021) An Analysis of Remotely Triggered Malware Exploits in Content Management System-Based Web Applications. In: Intelligence in Big Data Technologies—Beyond the Hype. Advances in Intelligent Systems and Computing (1167). Springer, Singapore, pp. 155-168. ISBN 9789811552854

Sankarasubramanian, R S (2022) Detection and Diagnosis of Fault Using Light-Weighted Midori Blocks. In: Futuristic Communication and Network Technologies. VICFCNT 2020. Lecture Notes in Electrical Engineering (792). Springer, Singapore, pp. 157-166. ISBN 9789811646249

Sankarasubramanian, R S (2022) Encryption and Decryption of Image for Secured Data Transmission. In: Futuristic Communication and Network Technologies. VICFCNT 2020. Lecture Notes in Electrical Engineering (792). Springer, Singapore, pp. 145-155. ISBN 9789811646249

Sankarasubramanian, R S (2021) FPGA Based Efficient IEEE 754 Floating Point Multiplier for Filter Operations. In: Microelectronic Devices, Circuits and Systems. Communications in Computer and Information Science,, 1392 . Springer, Singapore, pp. 375-386.

Sankarasubramanian, R S (2024) Facial Emotion Recognition Using Deep Learning. In: Intelligent Computing for Sustainable Development (ICICSD 2023). Communications in Computer and Information Science (2121). Springer, Singapore, pp. 109-123. ISBN 9783031612879

Saravanakumar, N (2023) Electric Discharge Drilling of Ti-6Al-4 V with O2 as Dielectric Medium. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 535-546. ISBN 9789811930522

Sasikiran, P and Nagarjun, J (2018) Analysis and Evaluation of Different Heat Treatment Fixture Designs Inspired from 3D Infill Patterns. In: Lecture Notes in Mechanical Engineering. Pleiades journals, pp. 393-401.

Sathiyanathan, M (2021) Multi‐Mode Power Converter Topology for Renewable Energy Integration With Smart Grid. In: Integration of Renewable Energy Sources with Smart Grid. Wiley, pp. 141-169. ISBN 9781119751908

Sathiyanathan, M and Anandhakumar, K and Subash Kumar, C S (2022) Remaining Useful Life Prediction of Small and Large Signal Analog Circuits Using Filtering Algorithms. In: Smart Systems for Industrial Applications. Wiley, pp. 93-113. ISBN 9781119762010

Senthilkumar, K (2023) 15 Effect of carbon nanotubes, aluminum hydroxide, and zinc borate on the mechanical and fire properties of epoxy nanocomposite: Processing and Applications. In: Nanocomposite and Nanohybrid Materials. De Gruyter, pp. 297-314. ISBN 9783111137902

Senthilkumar, K (2023) Epoxy Nanocomposites for Fire-Retardant Applications. In: Epoxy-Based Biocomposites. CRC Press, Boca Raton, pp. 267-285. ISBN 9781003271017

Senthilkumar, K (2023) Kenaf-Banana-Jute Fiber-Reinforced Vinyl Ester-Based Hybrid Composites. In: Vinyl Ester-Based Biocomposites. CRC Press, Boca Raton, pp. 207-224. ISBN 9781003270997

Senthilkumar, K (2023) Lightweight and sustainable materials for automotive applications. In: Lightweight and Sustainable Composite Materials. Elsevier, pp. 143-156. ISBN 9780323951890

Senthilkumar, K (2023) Mechanical properties of epoxy/carbon nanotube composites. In: Synthetic and Natural Nanofillers in Polymer Composites. Elsevier, pp. 75-87.

Senthilkumar, K (2023) Polymer Crystallization: Methods, Characterization, and Applications. In: Polymer Crystallization: Methods, Characterization, and Applications. Wiley, X-XI. ISBN 9783527839247

Senthilkumar, K (2023) Recyclability of lightweight and sustainable materials. In: Lightweight and Sustainable Composite Materials. Elsevier, pp. 79-96. ISBN 9780323951890

Senthilkumar, K (2024) Tribological Properties of the Natural Fiber‐Reinforced Vinyl Ester Composites. In: Tribological Properties, Performance and Applications of Biocomposites. Wiley, pp. 65-73. ISBN 9783527838080

ShanthinI, M and Bhuvana, S (2023) A Performance Comparison of State-of-the-Art Imputation and Classification Strategies on Insurance Fraud Detection. In: Micro-Electronics and Telecommunication Engineering. Lecture Notes in Networks and Systems (617). Springer, Singapore, pp. 215-225. ISBN 9789811995118

ShanthinI, M and Vidya, G (2021) IoT-Based Smart Door Lock with Sanitizing System. In: Inventive Computation and Information Technologies. Lecture Notes in Networks and Systems (173). Springer, Singapore, pp. 63-79. ISBN 9789813343054

Shievedha, S and Dharshini, V P and Ajay Vasanth, X (2024) Optimization and Prediction of Tool Wear Using Hybrid Grey Relation Analysis and Regression for Milling Operation. In: Recent Advances in Industrial and Systems Engineering. RAISE 2023. Lecture Notes on Multidisciplinary Industrial Engineering . Springer, Singapore, pp. 271-280.

Sivananda Devi, K (2021) Studies on the Improved Design in the Heat-Setting Platen Used in Textile Industry. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 665-679. ISBN 9789811598098

Sowmiya, M (2021) Deep Learning in Smart Applications: Approaches and Challenges. In: Challenges and Solutions for Sustainable Smart City Development. Springer, pp. 49-73. ISBN 9783030701826

Suraj, S and Nivedha Sri, S S and Ragul Krishna, P and Jagatheaswaran, S and Manoj Kumar, P (2021) CFD Analysis of NACA 4412 Aerofoil Considering Ground Effect. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 563-571. ISBN 9789811598098

Susithra, N and Santhanamari, G and Deepa, M and Reba, P (2021) Deep Learning-Based Activity Monitoring for Smart Environment Using Radar. In: Challenges and Solutions for Sustainable Smart City Development. EAI/Springer Innovations in Communication and Computing . Springer, pp. 91-123. ISBN 9783030701833

Swaminathan, G (2024) Thermal and Thermomechanical Cycling Studies of Nickel-Based Shape Memory Alloys for Engineering and Medical Applications. In: Advanced Materials for Emerging Applications (Innovations, Improvements, Inclusion and Impact). BENTHAM SCIENCE PUBLISHERS, pp. 62-79. ISBN 9789815196771

Thirumalai Kumaran, S (2024) Electrical Discharge Machining of Al‐B 4 C Composite for Biomedical Applications. In: Sustainable Machining and Green Manufacturing. Wiley, pp. 65-78. ISBN 9781394197866

Thivaharan, S (2023) Cloud Computing Principles for Optimizing Robot Task Offloading Processes. In: AI-Enabled Social Robotics in Human Care Services. IGI Global, pp. 188-211. ISBN 9781668481738

Vetrivelan, P (2023) Efficient blurred and deblurred image classification using machine learning approach. In: Advancement of Data Processing Methods for Artificial and Computing Intelligence. 1 ed. River Publishers, pp. 237-255. ISBN 9781032630212