Article

Ajay Vasanth, X (2024) Evaluating the impact of electromagnetic effects on randomized and pre-structured smart silicone magneto-rheological damper in hardened steel turning operations. Multiscale and Multidisciplinary Modeling, Experiments and Design. ISSN 2520-8160

Avinash Kumar, R (2024) Comparison of mathematical modeling to determine the fanning friction (f) and colburn (j) factors for an offset strip compact heat exchanger. International Journal on Interactive Design and Manufacturing (IJIDeM). ISSN 1955-2513

Deepasree, S and Sasikumar, R and Anto Dilip, A and Abdul Aleem Mohamed, I and Alagar, M (2024) Valorization of waste foundry sand by squeezing with sustainable cardanol-starch modified binder for engineered stone. Innovative Infrastructure Solutions, 9 (6): 217. ISSN 2364-4176

Govarthini, S S and Alagar, M and Nanthakumar, S and Thangaraju, D (2024) Phase transition influenced photocatalytic dye degradation capability of pure and Eu-doped CoMoO 4 polymorphic nanostructures. Phase Transitions, 97 (7-8). pp. 484-499. ISSN 0141-1594

Manoj Kumar, P (2024) Durable Electrocatalyst Support Materials Based on N-Doped Mesoporous Carbon Nanofibers with Titanium Nitride Overlay Coating for High-Performance Proton Exchange Membrane Fuel Cells. ACS Applied Nano Materials, 7 (5). pp. 4676-4691. ISSN 2574-0970

Nagarjun, J and Hariharan, A and Anto Dilip, A (2024) Mechanical behaviour of the post processed 3D printed PLA parts using polar and non-polar solvents. Polymer Bulletin, 81 (5). pp. 4257-4274. ISSN 0170-0839

Nanthakumar, S (2024) Adsorptive removal of cadmium from electroplating wastewater using hybrid composite of thiol-grafted seed gum of Tamarindus indica and Teff hay biocarbon. Zeitschrift für Physikalische Chemie. ISSN 0942-9352

Nanthakumar, S (2024) Examining the Combination of a Parabolic Solar Collector with Phase Change Material (PCM) in Solar Distillation. E3S Web of Conferences, 529. 02006. ISSN 2267-1242

Natarajan, Elango (2024) Depriving friction stir weld defects in dissimilar aluminum lap joints. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Pappu, A (2024) Thermal comfort enhancement of office buildings located under warm and humid climate through phase change material and insulation coupled with natural ventilation. Sustainable Energy Technologies and Assessments, 63. p. 103657. ISSN 22131388

Rajeshkumar, G (2024) Characterization of fly ash–based geopolymer composites reinforced with biomass-derived Phoenix sp. fibers. Biomass Conversion and Biorefinery. ISSN 2190-6815

Rajeshkumar, G (2024) Effect of halloysite addition on the dynamic mechanical and tribological properties of carbon and glass fiber reinforced hybrid composites. Heliyon, 10 (15): e35554. ISSN 24058440

Rajeshkumar, G (2024) Influence of stacking sequence and halloysite addition on the fracture toughness and low‐velocity impact strength of carbon/glass fiber reinforced hybrid composites. Polymer Composites, 45 (1). pp. 328-337. ISSN 0272-8397

Rajeshkumar, G and Janarthanan, P (2024) Effect of fish scale powder addition on the mechanical and free vibration properties of jute/carbon fibers reinforced hybrid polyester composites. Polymer Composites. ISSN 0272-8397

Rajkumar, V (2024) Microstructure, mechanical properties, and corrosion behaviour of wire arc additive manufactured martensitic stainless steel 410 for pressure vessel applications. International Journal of Pressure Vessels and Piping, 209: 105171. ISSN 03080161

Rajkumar, V and Ajay Vasanth, X (2024) Some studies on optimization of process parameters for wire ARC additive manufacturing of Hastelloy C276 using GRA-GWO hybrid techniques. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Saravanakumar, N and Anto Dilip, A (2024) Structural integrity and mechanical behaviour of magnesium oxide (MgO) as reinforcement in PLA-HDPE composite. Emergent Materials. ISSN 2522-5731

Senthilkumar, K (2024) Analysis of the thermal properties in short sansevieria cylindrica fibre/PLA composites processed by twin screw extruder followed by hot press molding technique. Materials Research Express, 11 (3). 035506. ISSN 2053-1591

Senthilkumar, K (2024) Characterization of Syzygium cumini (L.) Skeels (Jamun Seed) Particulate Fillers for Their Potential Use in Polymer Composites. Molecules, 29 (11). p. 2618. ISSN 1420-3049

Senthilkumar, K (2024) Enhancing the Bio-epoxy Composites with Oil Palm Fibre as Reinforcement: Assessment of Mechanical, Physical and Thermal Properties. Journal of Polymers and the Environment. ISSN 1566-2543

Senthilkumar, K (2024) Evolution, Prospects, and Predicaments of Polymers in Marine Applications: A Potential Successor to Traditional Materials. Recycling, 9 (1). p. 8. ISSN 2313-4321

Senthilkumar, K (2024) Examining the performance of eco-friendly flax fiber composites: mechanical, thermal and durability properties—review. Biomass Conversion and Biorefinery. ISSN 2190-6815

Senthilkumar, K (2024) Experimental investigation on the mechanical and acoustic performance of hemp/kenaf hybrid composites: Influence of different stacking sequences. Polymer Composites. ISSN 0272-8397

Senthilkumar, K (2024) Experimental investigation on the thermal characteristics of Kevlar/hemp intraply hybrid composites: Influence of various weaving designs. Industrial Crops and Products, 221. p. 119280. ISSN 09266690

Senthilkumar, K (2024) Influence of fibre loading on the density, voids, dimensional resilience, tensile characteristics and thermomechanical behaviour of bamboo fibre and bio‐epoxy composites. Polymer International, 73 (5). pp. 378-384. ISSN 0959-8103

Senthilkumar, K (2024) Progress in food packaging applications of biopolymer-nanometal composites — A comprehensive review. Biomaterials Advances, 162: 213921. ISSN 27729508

Senthilkumar, K (2024) Recycling of thermoset waste/high‐density polyethylene composites: Examining the thermal properties. Polymer Composites, 45 (3). pp. 2739-2748. ISSN 0272-8397

Senthilkumar, K (2024) A Review of the Current State of Research and Future Prospectives on Stimulus-Responsive Shape Memory Polymer Composite and Its Blends. Journal of Composites Science, 8 (8). p. 324. ISSN 2504-477X

Senthilkumar, K (2024) Thermal and tensile properties of 3D printed ABS-glass fibre, ABS-glass fibre-carbon fibre hybrid composites made by novel hybrid manufacturing technique. Journal of Thermoplastic Composite Materials, 37 (1). pp. 206-225. ISSN 0892-7057

Senthilkumar, K (2024) A correlation study on piezo-embedded carbon fibre reinforced polylactic acid composite: Experimental and numerical modelling. Journal of Thermoplastic Composite Materials. ISSN 0892-7057

Senthilkumar, M (2024) EV charging and fuel cell vehicle refuelling with distributed energy resources using hybrid approach. Environment, Development and Sustainability. ISSN 1573-2975

Senthilvel, M and Anitha, S (2024) Optimizing thermal efficiency: Advancements in flat plate heat exchanger performance through baffle integration. International Communications in Heat and Mass Transfer, 158: 107885. ISSN 07351933

Swaminathan, G (2024) Effect of cobalt addition on thermal cycling behaviour of Ti 50 Ni (50−x) cox shape memory alloys. Physica Scripta, 99 (3). 035927. ISSN 0031-8949

Swaminathan, G (2024) Influence of applied stress on shape memory characteristics of Ni 50 Ti 45 Cu 5 (at.%) alloy subjected to thermomechanical cycling. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. ISSN 1464-4207

Thirumalai Kumaran, S (2024) Electrochemical Corrosion Behavior of Thermally Sprayed Nichrome Coating on Duplex Stainless Steel. Journal of Testing and Evaluation, 52 (1). ISSN 0090-3973

Thirumalai Kumaran, S (2024) Failure assessment of armour grade tensile weld specimen: experimental, computational and analytical approach. Multiscale and Multidisciplinary Modeling, Experiments and Design. ISSN 2520-8160

Thirumalai Kumaran, S (2024) Machine learning models for enhanced cutting temperature prediction in hard milling process. International Journal on Interactive Design and Manufacturing (IJIDeM). ISSN 1955-2513

Thirumalai Kumaran, S (2024) Optimization modelling of spark plasma sintering parameters of SS316-B4C composite. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (4). pp. 2415-2427. ISSN 1955-2513

Thirumalai Kumaran, S (2024) Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique. Mechanics of Advanced Composite Structures, 11 (2). pp. 385-400. ISSN 24234826

Thirumalai Kumaran, S (2024) Optimization of solid particle erosion behavior of thermally sprayed nichrome on duplex stainless steel. International Journal on Interactive Design and Manufacturing (IJIDeM). ISSN 1955-2513

Thirumalai Kumaran, S (2024) SOLID PARTICLE AIRJET EROSION AND CORROSION BEHAVIOR OF AA6063 ALUMINUM ALLOY. Surface Review and Letters. ISSN 0218-625X

Thirumalai Kumaran, S (2024) Understanding the mechanism of ultrasonic vibration-assisted drilling (UVAD) for micro-hole formation on silicon wafers using numerical and analytical techniques. The International Journal of Advanced Manufacturing Technology, 132 (3-4). pp. 1283-1313. ISSN 0268-3768

Thirumalai Kumaran, S (2024) Wire Electric Discharge Machining of Aluminium Hybrid Composite: Renewable Energy Based IoT Approach. Journal of Current Science and Technology, 14 (1). ISSN 2630-0656

Tholkappiyan, R (2024) Thermoelectric potential: role of bismuth in CuSb1−xBixSe2 for improved transport properties. Journal of Materials Science: Materials in Electronics, 35 (18): 1195. ISSN 0957-4522

Book Section

UNSPECIFIED (2024) Front Matter. In: Thirumalai Kumaran, S (ed.) Sustainable Machining and Green Manufacturing. Wiley. ISBN 9781394197866

Jagadeesh, B (2024) Roadmap to Achieve Sustainable and Eco-Friendly Metal Additive Manufacturing Processes:. In: Futuristic Technology for Sustainable Manufacturing. IGI Global, pp. 185-215. ISBN 9798369318621

Nanthakumar, S (2024) Enhancement of Dehydrating of a Mixed Mode Solar Dehydrator with Regenerative Heat Storage System. In: Scientific and Technological Advances in Materials for Energy Storage and Conversions. FLUTE 2023. Springer, Singapore, pp. 599-607. ISBN 9789819724819

Nanthakumar, S (2024) Hemp Fibre-Reinforced Polylactic Acid Composites: A Sustainable Materials for Engineering and Industry. In: Polymer Composites. Engineering Materials . Springer, Singapore, pp. 217-248. ISBN 9789819720750

Nanthakumar, S (2024) Optimisation of abrasive and corrosion behavior of AA2218 reinforced with Si3N4 / Al2O3 / ZnO2 hybrid composites: Proceedings of 2nd International Conference (RAMMML-23). In: Recent Advances in Material, Manufacturing, and Machine Learning. CRC Press, London, pp. 665-675. ISBN 9781003450252

Nanthakumar, S (2024) Square Pyramid and Single Slope Solar Still: Experimental Analysis for Various Depth of Water. In: Scientific and Technological Advances in Materials for Energy Storage and Conversions, FLUTE 2023. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 29-39. ISBN 9789819724819

Rajeshkumar, G (2024) Wear Properties of Flax/Epoxy‐Based Composites With Different Machining Parameters. In: Tribological Properties, Performance and Applications of Biocomposites. Wiley, pp. 39-45. ISBN 9783527838080

Senthilkumar, K (2024) Tribological Properties of the Natural Fiber‐Reinforced Vinyl Ester Composites. In: Tribological Properties, Performance and Applications of Biocomposites. Wiley, pp. 65-73. ISBN 9783527838080

Shievedha, S and Dharshini, V P and Ajay Vasanth, X (2024) Optimization and Prediction of Tool Wear Using Hybrid Grey Relation Analysis and Regression for Milling Operation. In: Recent Advances in Industrial and Systems Engineering. RAISE 2023. Lecture Notes on Multidisciplinary Industrial Engineering . Springer, Singapore, pp. 271-280.

Swaminathan, G (2024) Thermal and Thermomechanical Cycling Studies of Nickel-Based Shape Memory Alloys for Engineering and Medical Applications. In: Advanced Materials for Emerging Applications (Innovations, Improvements, Inclusion and Impact). BENTHAM SCIENCE PUBLISHERS, pp. 62-79. ISBN 9789815196771

Thirumalai Kumaran, S (2024) Electrical Discharge Machining of Al‐B 4 C Composite for Biomedical Applications. In: Sustainable Machining and Green Manufacturing. Wiley, pp. 65-78. ISBN 9781394197866

Conference or Workshop Item

Ajay Vasanth, X and Rajkumar, V and Senthilkumar, K (2024) Characterization of Enhanced Magnetorheological Fluid Damper and Its Influence on Sustainable Hard Turning of SS410. In: International Conference on Trends in Automotive Parts Systems and Applications, Kuniamuthur, Coimbatore, India.

Senthilkumar, K and Rajkumar, V (2024) Evaluation of Coated and Uncoated Inserts of the Cutting Tool for Improved Machinability of Inconel 825 Alloy. In: Automotive Technical Papers, Warrendale, Pennsylvania, United States.

Senthilkumar, K and Rajkumar, V (2024) Proposal for Gemba-Kaizen Implementation to Enhance Efficiency in the Medium-Scale Bus Body Fabrication Industry. In: International Conference on Trends in Automotive Parts Systems and Applications, Kuniamuthur, Coimbatore, India.

Book

Thirumalai Kumaran, S (ed.). (2024) Sustainable Machining and Green Manufacturing. Wiley. ISBN 9781394197866

Senthilkumar, K (2024) Tribological Properties, Performance and Applications of Biocomposites. Wiley. ISBN 9783527838080