Article

Avinash Kumar, R and Manoj Kumar, P (2022) The hydraulic and thermal performances of rectangular and square microchannel with different hydraulic diameters cooled by graphene–platinum hybrid nanofluid. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236 (13). pp. 7473-7483. ISSN 0954-4062

Elango, N (2022) Differentiation in the SiC Filler Size Effect in the Mechanical and Tribological Properties of Friction-Spot-Welded AA5083-H116 Alloy. Fibers, 10 (12): 109. ISSN 2079-6439

Elango, N and Saravanakumar, N and Anto Dilip, A (2022) Drilling-Induced Damages in Hybrid Carbon and Glass Fiber-Reinforced Composite Laminate and Optimized Drilling Parameters. Journal of Composites Science, 6 (10): 310. ISSN 2504-477X

Elango, N and Saravanakumar, N and Anto Dilip, A (2022) Strategized friction stir welded AA6061-T6/SiC composite lap joint suitable for sheet metal applications. Journal of Materials Research and Technology, 21. pp. 30-39. ISSN 22387854

Elangovan, D (2022) Mapping of non-value adding activities occurring in classical manufacturing companies with lean strategies. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236 (3). pp. 894-906. ISSN 0954-4089

Malar, E (2022) Beamforming design with fully connected analog beamformer using deep learning. International Journal of Communication Systems, 35 (7): e5109. ISSN 1074-5351

Nagarjun, J and Rajeshkumar, G (2022) Improvement of Mechanical Properties of Coir/Epoxy Composites through Hybridization with Sisal and Palmyra Palm Fibers. Journal of Natural Fibers, 19 (2). pp. 475-484. ISSN 1544-0478

Nagarjun, J and Rajeshkumar, G and Manimaran, S and Krishnaprakash, M (2022) Enhancement of Mechanical Behavior of PLA Matrix Using Tamarind and Date Seed Micro Fillers. Journal of Natural Fibers, 19 (12). pp. 4662-4674. ISSN 1544-0478

Nanthakumar, S (2022) Analysis of Spectroscopic, Morphological Characterization and Interaction of Dye Molecules for the Surface Modification of TiB2 Nanoparticles. Journal of Nanomaterials, 2022. pp. 1-9. ISSN 1687-4110

Nanthakumar, S (2022) Experimental study of mechanical properties of Sisal/banana fiber hybrid sandwich composite. Materials Today: Proceedings, 68 (5). pp. 1793-1799. ISSN 22147853

Prem Kumar, T (2022) Performance Investigation on Solar Air Heater with Optimized Parabolic Rib Geometry Based on Thermo-Hydraulic Performance. Applied Solar Energy, 58 (4). pp. 559-566. ISSN 0003-701X

Prem Kumar, T and Manoj Kumar, P (2022) Combination studies of operating cell, inlet‐line, and humidification temperatures on performance of proton exchange membrane fuel cell. Fuel Cells, 22 (3). pp. 71-84. ISSN 1615-6846

Rajeshkumar, G (2022) Characterization of sustainable natural fiber reinforced geopolymer composites. Polymer Composites, 43 (6). pp. 3691-3698. ISSN 0272-8397

Rajeshkumar, G (2022) Delamination and surface roughness analysis of jute/polyester composites using response surface methodology: Consequence of sodium bicarbonate treatment. Journal of Industrial Textiles, 51 (1_supp). 360S-377S. ISSN 1528-0837

Rajeshkumar, G (2022) Effect of Fiber Orientation on Physical and Mechanical Properties of Typha angustifolia Natural Fiber Reinforced Composites. Applied Science and Engineering Progress, 16 (3). ISSN 26729156

Rajeshkumar, G (2022) Effect of sodium hydroxide treatment on dry sliding wear behavior of Phoenix sp. fiber reinforced polymer composites. Journal of Industrial Textiles, 51 (2_supp). 2819S-2834S. ISSN 1528-0837

Rajeshkumar, G (2022) Evaluation of Mechanical and Water Absorption Behaviors of Jute/Carbon Fiber Reinforced Polyester Hybrid Composites. Journal of Natural Fibers, 19 (13). pp. 6521-6533. ISSN 1544-0478

Rajeshkumar, G (2022) Improvement of mechanical and thermal properties of hybrid composites through addition of halloysite nanoclay for light weight structural applications. Journal of Industrial Textiles, 51 (3_supp). 4880S-4898S. ISSN 1528-0837

Rajeshkumar, G (2022) Improving the mechanical properties of jute fiber woven mat reinforced epoxy composites with addition of zinc oxide filler. E3S Web of Conferences, 355. 02006. ISSN 2267-1242

Rajeshkumar, G (2022) Influence of Processing Variables on Tensile Strength and Water Absorption of Natural Fibers Hybrid Composites. Journal of Natural Fibers, 19 (15). pp. 10846-10857. ISSN 1544-0478

Rajeshkumar, G (2022) An Investigation into the Mechanical and Wear Characteristics of Hybrid Composites: Influence of Different Types and Content of Biodegradable Reinforcements. Journal of Natural Fibers, 19 (8). pp. 2823-2835. ISSN 1544-0478

Rajeshkumar, G (2022) An Investigation into the Tribological Properties of Bidirectional Jute/Carbon Fiber Reinforced Polyester Hybrid Composites. Journal of Natural Fibers, 19 (3). pp. 943-953. ISSN 1544-0478

Rajeshkumar, G (2022) Investigation on Mechanical and Wear Behaviors of LM6 Aluminium Alloy-Based Hybrid Metal Matrix Composites Using Stir Casting Process. Advances in Materials Science and Engineering, 2022: 116843. pp. 1-10. ISSN 1687-8434

Rajeshkumar, G (2022) Mechanical, water absorption and wear characteristics of novel polymeric composites: Impact of hybrid natural fibers and oil cake filler addition. Journal of Industrial Textiles, 51 (4_supp). 5910S-5937S. ISSN 1528-0837

Rajeshkumar, G (2022) Optimization of electrocoagulation process for treatment of rice mill effluent using response surface methodology. Journal of Water Process Engineering, 49: 103074. ISSN 22147144

Rajeshkumar, G (2022) Review of advanced techniques for manufacturing biocomposites: non-destructive evaluation and artificial intelligence-assisted modeling. Journal of Materials Science, 57 (34). pp. 16091-16146. ISSN 0022-2461

Rajeshkumar, G (2022) Review on extraction, characterization, surface treatment and thermal degradation analysis of new cellulosic fibers as sustainable reinforcement in polymer composites. Current Research in Green and Sustainable Chemistry, 5. p. 100271. ISSN 26660865

Rajeshkumar, G (2022) Sustainable Development of Cissus Quadrangularis Stem Fiber/epoxy Composite on Abrasive Wear Rate. Journal of Natural Fibers, 19 (14). pp. 9283-9295. ISSN 1544-0478

Rajeshkumar, G (2022) Sustainable recycling technologies for thermoplastic polymers and their composites: A review of the state of the art. Polymer Composites, 43 (9). pp. 5831-5862. ISSN 0272-8397

Rajeshkumar, G (2022) Tribological and Thermo-Mechanical Performance of Chemically Modified Musa Acuminata / Corchorus Capsularis Reinforced Hybrid Composites. Journal of Natural Fibers, 19 (12). pp. 4640-4653. ISSN 1544-0478

Saravanakumar, N and Anto Dilip, A (2022) Mechanical and wear behaviour of PEEK, PTFE and PU: review and experimental study. Journal of Polymer Engineering, 42 (5). pp. 407-417. ISSN 0334-6447

Senthilkumar, K (2022) Flexural, impact and dynamic mechanical analysis of hybrid composites: Olive tree leaves powder/ pineapple leaf fibre/epoxy matrix. Journal of Materials Research and Technology, 21. pp. 4241-4252. ISSN 22387854

Senthilkumar, K (2022) Lignocellulosic microfibrils from Phaseolus lunatus and Vigna radiata biomass: characterization and properties. Biomass Conversion and Biorefinery. ISSN 2190-6815

Senthilkumar, K (2022) Mechanical, absorption, and swelling properties of jute/kenaf/banana reinforced epoxy hybrid composites: Influence of various stacking sequences. Polymer Composites, 43 (11). pp. 8297-8307. ISSN 0272-8397

Senthilkumar, K (2022) Nanocellulose: A Fundamental Material for Science and Technology Applications. Molecules, 27 (22). p. 8032. ISSN 1420-3049

Senthilkumar, K (2022) Ply-stacking effects on mechanical properties of Kevlar-29/banana woven mats reinforced epoxy hybrid composites. Journal of Industrial Textiles, 52. ISSN 1528-0837

Thirumalai Kumaran, S (2022) Hardness and Impact Fracture Behavior of Armor Weldment Using Austenitic Stainless Steel Filler. Human Factors and Mechanical Engineering for Defense and Safety, 6 (1). ISSN 2509-8004

Thirumalai Kumaran, S (2022) Solid Particle Erosion Studies of Varying Tow-Scale Carbon Fibre-Reinforced Polymer Composites. Materials, 15 (21). p. 7534. ISSN 1996-1944

Thirumalai Kumaran, S (2022) Solid particle erosion behavior of nichrome coated duplex stainless steel. International Journal of Advanced Technology and Engineering Exploration, 9 (97). ISSN 23945443

Book Section

Rajeshkumar, G (2022) Natural Fiber-Reinforced Biocomposites. In: Encyclopedia of Materials: Plastics and Polymers. Elsevier, pp. 504-510. ISBN 9780128232910

Rajeshkumar, G (2022) Novel plant, their composites and applications. In: Plant Fibers, their Composites, and Applications. Elsevier, pp. 437-456. ISBN 9780128245286

Rajeshkumar, G (2022) Recycling and Biodegradation Studies of Epoxy/Natural Fiber Composites. In: Handbook of Epoxy/Fiber Composites. Springer Nature Singapore, Singapore, pp. 837-850. ISBN 9789811936036

Rajeshkumar, G and Arvindh Seshadri, S (2022) Mechanical behavior of elastomer blends and composites. In: Elastomer Blends and Composites. Elsevier, pp. 127-147.

Rajeshkumar, G and Arvindh Seshadri, S and Ronia Richelle, R and Madhu Mitha, K and Abinaya, V (2022) Production of biodegradable films and blends from proteins. In: Biodegradable Polymers, Blends and Composites. Composites Science and Engineering . Elsevier, pp. 681-692.

Rajeshkumar, G and Seshadri, S A (2022) PLA Based Sustainable Composites. In: Encyclopedia of Materials: Plastics and Polymers. Elsevier, pp. 520-529.

Ramesh, R (2022) Microstructural Characterisation of AA5083 in AA5083/SiC Co-Continuous Ceramic Composites (C4) Fabricated by Gravity and Gas Pressure Infiltration. In: Characterization of Minerals, Metals, and Materials 2022. The Minerals, Metals & Materials Series . Springer, pp. 57-68. ISBN 9783030923723

Book

Thirumalai Kumaran, S (2022) Materials for Lightweight Constructions. CRC Press, Boca Raton. ISBN 9781003252108