Saravanakumar, N and Anto Dilip, A (2024) Structural integrity and mechanical behaviour of magnesium oxide (MgO) as reinforcement in PLA-HDPE composite. Emergent Materials. ISSN 2522-5731

Senthilvel, M and Saravanakumar, N and Hareni, M (2023) Synthesis of chemically exfoliated reduced graphene oxide from as-grated graphite rods recovered from used household batteries for utilization in tribological applications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 237 (9). pp. 2068-2082. ISSN 1464-4207

Elango, N and Saravanakumar, N and Anto Dilip, A (2023) Enhanced mechanical, tribological, and acoustical behavior of polyphenylene sulfide composites reinforced with zero‐dimensional alumina. Journal of Applied Polymer Science, 140 (16): e53748. ISSN 0021-8995

Saravanakumar, N (2023) Electric Discharge Drilling of Ti-6Al-4 V with O2 as Dielectric Medium. In: Materials, Design, and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 535-546. ISBN 9789811930522

Elango, N and Saravanakumar, N and Anto Dilip, A (2022) Strategized friction stir welded AA6061-T6/SiC composite lap joint suitable for sheet metal applications. Journal of Materials Research and Technology, 21. pp. 30-39. ISSN 22387854

Elango, N and Saravanakumar, N and Anto Dilip, A (2022) Drilling-Induced Damages in Hybrid Carbon and Glass Fiber-Reinforced Composite Laminate and Optimized Drilling Parameters. Journal of Composites Science, 6 (10): 310. ISSN 2504-477X

Saravanakumar, N and Anto Dilip, A (2022) Mechanical and wear behaviour of PEEK, PTFE and PU: review and experimental study. Journal of Polymer Engineering, 42 (5). pp. 407-417. ISSN 0334-6447

Saravanakumar, N (2019) Experimental study on the anti-wear and anti-corrosive properties of the water-soluble metalworking fluid dispersed with copper and aluminium oxide nanoparticles. Materials Research Express, 6 (12). p. 125022. ISSN 2053-1591

Saravanakumar, N and Jothi Saravanan, M L and Barathkumar, K E and Gokula Kannan, K and Karthikeyan, R (2019) Development and testing of nano particulate lubricant for worm gear application. Journal of Mechanical Science and Technology, 33 (4). pp. 1785-1791. ISSN 1738-494X

Saravanakumar, N (2019) Multi-objective optimization of micro deep drawing process using taguchi-based grey relational analysis. Journal of the Balkan Tribological Association, 25 (1). pp. 50-66. ISSN 13104772

Saravanakumar, N (2018) Influence of Ag Nanoparticles for the Anti-wear and Extreme Pressure Properties of the Mineral Oil Based Nano-cutting Fluid. Tribology in Industry, 40 (3). pp. 440-447. ISSN 03548996

Saravanakumar, N (2018) CORROSION BEHAVIOR OF A Ni–TiO2 NANOCOMPOSITE COATED BY PULSE ELECTRODEPOSITION. High Temperature Material Processes An International Quarterly of High-Technology Plasma Processes, 22 (4). pp. 219-229. ISSN 1093-3611

Saravanakumar, N (2015) Characterization of Ni-TiO2 nano coating by pulse plating. International Journal of Applied Engineering Research, 10 (13). pp. 11101-11105.

Saravanakumar, N (2015) Tribological processes and its technological advances for MEMS applications – A review. International Journal of Applied Engineering Research, 10 (13). pp. 11232-11247.

Saravanakumar, N (2015) A review on effects of mechanical properties of thin film material, deposition process and characterization technique for MEMS applications. International Journal of Applied Engineering Research, 10 (6). pp. 13999-14014.

Saravanakumar, N (2014) Effects of process conditions of chemical vapor deposition on silicon carbide thin films for MEMS applications: A review. International Journal of Applied Engineering Research, 9 (24). pp. 24175-24192. ISSN 9734562