Article

Deepasree, S and Sasikumar, R and Anto Dilip, A and Abdul Aleem Mohamed, I and Alagar, M (2024) Valorization of waste foundry sand by squeezing with sustainable cardanol-starch modified binder for engineered stone. Innovative Infrastructure Solutions, 9 (6): 217. ISSN 2364-4176

Nagarjun, J and Hariharan, A and Anto Dilip, A (2024) Mechanical behaviour of the post processed 3D printed PLA parts using polar and non-polar solvents. Polymer Bulletin, 81 (5). pp. 4257-4274. ISSN 0170-0839

Saravanakumar, N and Anto Dilip, A (2024) Structural integrity and mechanical behaviour of magnesium oxide (MgO) as reinforcement in PLA-HDPE composite. Emergent Materials. ISSN 2522-5731

Nagarjun, J and Rajeshkumar, G and Anto Dilip, A (2023) Enhanced mechanical characteristics of polylactic acid/tamarind kernel filler green composite filament for 3D printing. Polymer Composites, 44 (11). pp. 7925-7940. ISSN 0272-8397

Elango, N and Saravanakumar, N and Anto Dilip, A (2023) Enhanced mechanical, tribological, and acoustical behavior of polyphenylene sulfide composites reinforced with zero‐dimensional alumina. Journal of Applied Polymer Science, 140 (16): e53748. ISSN 0021-8995

Senthilkumar, K and Anto Dilip, A (2023) Investigation of Wear Behavior in Self-Lubricating ABS Polymer Composites Reinforced with Glass Fiber/ABS and Glass Fiber/Carbon Fiber/ABS Hybrid. Lubricants, 11 (3). p. 131. ISSN 2075-4442

Harinei, S and Hariharan, A and Anto Dilip, A and BalajI, K and Abdul Aleem Mohamed, I and Arun, M and Alagar, M (2023) Desert cotton and areca nut husk fibre reinforced hybridized bio-benzoxazine/epoxy bio-composites: Thermal, electrical and acoustic insulation applications. Construction and Building Materials, 363. p. 129870. ISSN 09500618

Elango, N and Saravanakumar, N and Anto Dilip, A (2022) Strategized friction stir welded AA6061-T6/SiC composite lap joint suitable for sheet metal applications. Journal of Materials Research and Technology, 21. pp. 30-39. ISSN 22387854

Elango, N and Saravanakumar, N and Anto Dilip, A (2022) Drilling-Induced Damages in Hybrid Carbon and Glass Fiber-Reinforced Composite Laminate and Optimized Drilling Parameters. Journal of Composites Science, 6 (10): 310. ISSN 2504-477X

Saravanakumar, N and Anto Dilip, A (2022) Mechanical and wear behaviour of PEEK, PTFE and PU: review and experimental study. Journal of Polymer Engineering, 42 (5). pp. 407-417. ISSN 0334-6447

Hariharan, A and BalajI, K and Gokul, P and Anto Dilip, A and Abdul Aleem Mohamed, I and Alagar, M (2021) Bio-composites of rice husk and saw dust reinforced bio-benzoxazine/epoxy hybridized matrices: Thermal, mechanical, electrical resistance and acoustic absorption properties. Construction and Building Materials, 312. p. 125381. ISSN 09500618